PHILIPS AWH1620/51(30YC) - Инструкция по эксплуатации - Страница 14

12

Exploitation

Turning on the water heater

1   Open one of the hot water outlet valves, 

then open the cold water supply valve  The 

electric water heater will begin to fill with 

water.  When  water  flows  freely  from  the 

hot water tap, this means that the water 

heater is completely filled with water and 

the hot water outlet tap can be closed 

2  Insert the electrical plug into the socket 

3.  Press  the «On/Off»  button  on  the  control 

panel  The screen will display the actual 

water temperature, power level, set 

temperature, operation mode and time 

During normal operation, the cold water 

supply tap must be set to the «open» 

position 

Attention!

1   Tank water temperature indicator

2   Set water temperature indicator

3   Time

4   Power mode indicator

5   ECO mode indicator

6   Turbo mode indicator

7   Heating indicator

8   Warm indicator

9   Timer indicator

10  Time indicator

11  Power mode selection button

12  Button to increase temperature and 

time during related settings

13  

Water heater on/off button

14  Button to decrease temperature and 

time during related settings

15  Operation mode/time setting button

Power mode selection

To select the power mode, press the 

«Set»  button  and  select  one  of  the  heater 

heating power modes:

1 - low (800 W)

2 - medium (1200 W)

3 - intensive (2000 W)

Temperature setting

After turning on the water heater, press 

button      or       to adjust the desired water 

temperature  Selection range from 35 to 75 °C 

fig

  6

1

2

9

10

4

3

11

5

6

7

8

12

13

14

15