PHILIPS AWH1611/51(50YA) - Инструкция по эксплуатации - Страница 14

12

OptimalTEMP

Turning on the water heater

1   Open one of the hot water outlet valves, 

then open the cold water supply valve  The 

electric water heater will begin to fill with 

water.  When  water  flows  freely  from  the 

hot water tap, this means that the water 

heater is completely filled with water and 

the hot water outlet tap can be closed 

2   Insert the electrical plug into the socket 

During normal operation, the cold water 

supply tap must be set to the «open» 

position 

Power mode selection

To select the power mode, turn the switch 

[1] and select one of the heater heating 

power modes:

I - low (800 W)

II - medium (1200 W)

III - intensive (2000 W)

fig

  5

Exploitation

RCD (residual current device)

• 

 Prevention of electrical leakage 

• 

 Follow the installation instructions when 

connecting the water heater 

• 

 Connect the power plug to the mains, press 

the button on the front side of the RCD (3), 

the indicator light will light up  

• 

 To test the RCD, press the TEST button (2)  

The Power indicator (1) will be off.

• 

 To restart the RCD, press button (3)  

1

2

3

Attention!

fig

  6

1   Power mode switch
2   Temperature regulator
3   Heating indicator
4   Power indicator

1

2

3 4