Ariston VLS EVO INOX 80 PW O 3700632 - Инструкция по эксплуатации - Страница 50

EN

11.  The electrical hookup must be done as indicated in this manual. 

12.  If the appliance is equipped with a power cord, the latter may 

only be replaced by an authorised service centre or professional 

technician.  

13.  Do not tamper with the overpressure safety device, if supplied to-

gether with the appliance; trip it from time to time to ensure that 

it is not jammed and to remove any scale deposits. In countries 

which have enacted EN 1487, the appliance’s intake pipe must be 

equipped with a safety device compliant with the said standard, 

calibrated to a maximum pressure of 0.7 MPa, including at least a 

cock, check valve, safety valve and hydraulic load cutout. 

14.  It is normal that water drip from the overpressure safety device 

and EN 1487 safety unit when the appliance is heating. For this 

reason one must install a drain, open to the air, with a continu-

ously downwards sloping pipe, in an area not subject to subzero 

temperatures. Make sure to drain the appliance when it is out of 

service or in an area subject to subzero temperatures. 

15.  Make sure to drain the appliance when it is out of service or in an 

area subject to subzero temperatures. 

16.  Water heated to over 50° C can cause immediate serious burns if 

delivered directly to the taps. Children, disabled persons and the 

aged are particularly at risk. We recommend installing a thermo-

static mixer valve on the water delivery line, marked with a red 

collar. 

17.  Do not leave flammable materials in contact with or in the vicini-

ty of the appliance.

50