Liebherr WKes 4177 - Инструкция по эксплуатации - Страница 5

19

GB

Switching the appliance on and off

You are recommended to clean the appliance before switching it on for the first time 
(see 

"Cleaning"

). Connect the appliance to the mains - the appliance is switched on.

• To switch the appliance off: 

Keep the "

ON / OFF

" button pressed for 3 sec. 

so that the temperature display goes out. 

• To switch the appliance on:

 Press the "

ON / OFF

" button until the Display 

lights  up. 

Setting the temperature

To reduce the temperature: 

Press the DOWN button; 

To increase the temperature: 

Press the UP button.

-  While you are entering the temperature, the set tempera-

ture will flash on the display.

-  You can change the settings in increments of 1°C briefly 

pressing the button again. 

-  The electronic controls will switch over automatically about 5 seconds after the last 

time you pressed the button, and the actual temperature will be displayed. 

If 

F1

 appears in the display, the appliance has a fault. Consult your nearest customer 

service point.

Fan switch

Thereby a climate which corresponds to that of a wine cellar is achieved inside the 
wine cooler. Corks are prevented from drying out due to an increased level of humidity.

To switch on:

Hold down the 

Alarm

 button and then press the 

Light

 button. The LED   will come on.

To switch off:

Hold down the 

Alarm

 button and then press the 

Light

 button. The LED   goes dark.