Dometic MaCave D52 - Инструкция по эксплуатации - Страница 17

EN

D15, D 50, D 52

Setting up and connecting the appliance

17

7.3

Reversing the door

You can also change the hinge of the door, so that it opens to the left rather than the 
right. 
Then fit the door handle on the other side, see chapter “Fitting the door handle on 
the other side” on page 17.

➤

Change the door as described in fig.

3

, page 4 to fig.

7

, page 5.

Fitting the door handle on the other side

➤

Fit the door handle on the other side as described in fig.

8

, page 5 to fig.

9

, 

page 5.

7.4

Information on electrical connection

A

Observe the following when connecting the appliance:

•

Connect the appliance to a separate circuit that is protected with 15 A.

•

Have the socket and power circuit checked by a qualified electrician to ensure 
that the socket is earthed correctly. 

•

Check that the voltage specification on the type plate is the same as that of the 
power supply.

•

If you use an extension cable, this must be approved for the same values as the 
appliance, see chapter “Technical data” on page 28.

•

Do not use an extension cable or a multiple power socket that can be switched 
off with just one switch.

•

The cable must rest securely behind the appliance and not be allowed to lie or 
hang unprotected.

NOTICE! 

Leave the appliance to stand upright for about 2 hours after transporting, 
before you connect it to the power supply. 
Otherwise this could cause faults in the cooling system.

D15-D50-D52-O-12s.book  Seite 17  Freitag, 27. Oktober 2017  5:46 17