Dometic MaCave D52 - Инструкция по эксплуатации - Страница 16

EN

Setting up and connecting the appliance

D15, D 50, D 52

16

7

Setting up and connecting the 
appliance

7.1

Notes on setting up the appliance

All models can be set up on a fitted or free-standing basis.

When selecting the location, observe the following instructions:

•

The ambient temperature should be in the range specified for your country in the 
supplementary “Country versions” booklet. Otherwise, it could mean that the 
inner temperature you set cannot be reached or maintained. This could also be 
the case if there are extreme fluctuations in the ambient temperature

•

The appliance should stand in the coldest part of the room, away from heat 
sources (ovens, heating devices or radiators).

•

The location must not be damp or wet.

•

The appliance must not be exposed to direct sunlight. This can damage the 
acrylic coating and lead to higher power consumption.

•

The ground must be level and sufficiently stable to bear the appliance at full 
capacity.

•

The appliance must be sufficiently ventilated. The ventilation slots on the front of 
the appliance must not be obstructed.

•

Note the information on the electrical connection, see chapter “Information on 
electrical connection” on page 17.

•

Remove all the inner and outer packaging materials before setting up.

•

Make sure the appliance is level by adjusting the feet.

7.2

Notes on installing the appliance

The models can be installed in a kitchen unit under the counter.

Installation size (in mm)

D 15

D 50

D 52

Width

300

600

600

Depth

590

590

575

Height

870

870

865

D15-D50-D52-O-12s.book  Seite 16  Freitag, 27. Oktober 2017  5:46 17