Beurer BF 750 - Инструкция по эксплуатации - Страница 13

13

repairs

  IMPOrTanT

•  Never open or attempt to repair the unit yourself, as otherwise proper function is no longer guar-

anteed. Failure to observe this regulation shall void the warranty.

•  If you need to have the unit repaired, contact customer service or an authorised dealer.

4. Unit description

Overview

1. Electrodes = conductive ITO coating 

2. Display

3. “Up” key

4. “SET” key

5. “Down” key

5. Initial use

Inserting batteries

If provided, pull out the battery insulating strip at the battery compartment or remove the protective film 

from the battery and insert the battery with the correct polarity. If the scale fails to operate, remove the 

battery completely and reinsert it.

Changing the weight unit

On delivery, the scale is set to “cm” and “kg”. At the back of the scales is a switch with which you can 

switch between “inches”, “pounds” and “stones” (lb, st).

setting up the scale

Place the scale on a firm level floor (no carpet); a firm floor covering is required for correct measurement.

switch on the scale

Audibly, briefly and firmly tap the scale with your foot to activate the vibration sensor.

6. Information

The measuring principle

This scale operates according to the B.I.A. principle (bioelectric impedance analysis). This enables the 

measurement of physical relationships within seconds by means of an undetectable, completely harmless 

electric current. The body fat percentage and other physical relationships in the body can be determined 

by measuring the electrical resistance (impedance) and calculating constants and individual parameters 

such as age, height, gender and degree of activity.

Muscle tissue and water have good electrical conductivity, and therefore lower resistance. Bones and fatty 

tissue, on the other hand, have low conductivity as fat cells and bones conduct hardly any current as a 

result of their very high resistance.

Please be aware that values obtained from the diagnostic scale represent only an approximation of actual 

analytical medical data. Only a specialist physician can accurately determine body fat, body water, muscle 

percentage and bone structure using medical procedures (e.g. computed tomography).

General tips

•  If possible, always weigh yourself at the same time of day (preferably in the morning), after using the toi-

let, on an empty stomach and unclothed, in order to achieve comparable results.

•  Important for the measurement: only measure body fat when barefoot and with the soles of the feet 

slightly moist.

5

2

1

4

3