Stadler Form Leo - Инструкция по эксплуатации - Страница 6

• Assemble the appliance in accordance with the instructions for Assembly. 

Follow the instructions for assembly exactly and ensure that all screws 
are firmly tightened so as to avoid damage and hazards. 

• Never insert objects into the grille of the fan. Do not cover the appliance 

during operation. 

• Always disconnect the power cord from the socket before removing the 

protection grille.

• Only connect the cable to alternating current. Observe the voltage infor-

mation given on the appliance.

• Do not use damaged extension cords.

• Do not run the power cord over sharp edges and make sure that it does 

not get trapped.

• Do not pull the plug from the socket with wet hands or by holding on to 

the power cord.

• Do not use the appliance in immediate vicinity of a bath tub, a shower or a 

swimming pool (observe a minimum distance of 3 m). Place the appliance 
such that a person in the bath tub cannot touch the appliance.

• Do not place the appliance near a heat source. Do not subject the power 

cord to direct heat (such as a heated hotplate, open flames, hot iron sole 
plates or heaters for example). Protect power cords from oil.

• See to it that the appliance is properly positioned to ensure a high stabil-

ity during its operation and make sure that no one can trip over the power 
cord.

• The appliance is not splash-proof.

• For indoor use only.

• Do not store the appliance outdoors. 

• Store the appliance in a dry place inaccessible to children (pack the ap-

pliance).

• Prior to any maintenance, cleaning and after each use, switch off the ap-

pliance and unplug the mains cable from the socket. 

• Repairs to electrical appliances must only be carried out by a qualified 

electrical technician.

• Only use the adapter provided by the manufacturer.

Setting up / operation

1.  To pick up Leo, push the carrying handle (1) upwards. Place Leo in the 

desired location on a flat surface. Connect the power adapter (2) to the 
appliance (3) and insert the adapter into a suitable mains socket.

2.  Switch on the appliance by pressing the on/off button (4). The appliance 

gives an audible signal when a setting is changed via the control panel.

3.  Press the button for the selection of the speed level (5) to change the 

fan speed (levels 1– 4). Pressing once increases the speed by one level. 

struction concerning use of the appliance in a safe way and understand 

the hazards involved. Children shall not play with the appliance. Cleaning 

and user maintenance shall not be made by children without supervision.

•

Never leave any parts of the packing within the reach of children.

•

If the supply cord is damaged, it must be replaced by the manufacturer, 

or its service agent, or a qualified person in order to avoid a hazard.