Zigmund & Shtain CIS 321.60 BX - Инструкция по эксплуатации - Страница 8

- 8 -

magnet (Fig.7). We advise recipients having a flat base 

(Fig.8A). This way you can use the power optimally. 

Do not use recipients with a rough base to avoid 

scratching the thermal surface of the top.  

A very important factor in induction cooking is the dimension 

of the pot compared to the plate used (Fig.8B). The 

cooking zones allow the use of recipients with bases of 

various diameters. It is, however, preferable to use the 

appropriate cooking zone for the dimension of the pot: 

- if pot diameter is 160 mm, the Pot.detection. is 90 mm 

and the Pot.max is 180 mm; 

- if pot diameter is 200 mm the Pot.detection is 120 mm, 

and Pot. max. 210 mm.

SWITCHING THE COOKING TOP ON                                             

• Connect the stovetops to the mains  

• SWITCHING THE COOKING TOP ON  

Press 

A 

 key to switch the top on. 

All the displays relative to the cooking zones switch on in 

the   standby position. 

The control unit remains active for 10 seconds. 

If no cooking zone is selected within this time, the 

ccoking top switches off automatically.

• SWITCHING THE COOKING AREA ON

Select the desired cooking zone and press or crawl one 

of the 

E

 keys. 

Press key 

E

  to go to position 

9 

(max. power) or to go to 

position 

1 

(min. power).

The power of the single cooking zone can be adjusted 

in 

9

 different positions and will be shown on the relative 

luminous display 

E 

with a number from “1 to 9”. 

• ADJUST THE POWER OF COOKING

To increase / decrease the power of the cooking zone 

selected, crawl in a clockwise / counterclockwise

E

 keys. The power can be set from 

0

 to 

9

.

• QUICK / BOOSTER HEATING

This function further reduces cooking time in a given area 

taking the temperature to the maximum power for a 

10 

minute interval. At the end of this interval, the cooking 

area power automatically returns to level 

9

.

The use of this function is indicated for the short time heating 

of large quantities of liquid (eg water for cooking pasta) or 

dishes.

After selecting a cooking zone can be selected by 

pressing the 

D

 booster function, this function for a time 

of 10 minutes the plate selected feeds at

maximum power  .

• PAUSE 

When at least one cooking zone is operating it is possible 

to momentaneously pause the appliance switching off the 

heating elements by pressing the 

C

 key. When the pause 

function is active the relative led is on. The pause may 

last for 10 minutes. If the status is not terminated within 

this time the appliance switches off. The pause function 

can be deactivated by pressing the 

C

 key and within 10 

seconds any of the control keys. Previously programmed 

timers will be stopped during the pause.

• TIMER

This function allows establishing the time (from 

1

 to 

99

minutes) for automatically switching the selected cooking 

zone off. Switch on at least one cooking zone and adjust 

the temperature.

Press simultaneously the  

H

 and  

I

 key to enter the 

timer function. Press either button to adjust the cooking 

time is shown on its display. Select the required cooking 

zone with one of the buttons and LED bar under the 

diplay of the area activated, indicating the selection. Set 

the power of the area between 

1

 and 

9

 keys with the 

same 

E

. Set at this point the desired sleep time using 

the keys 

H

 or 

I

 timers in the area. The inclusion of the 

timer with the clock symbol will appear next to the display 

of the cooking zone selected. The countdown will be 

displayed on the display above the keys 

H

 - 

I

. The timer 

will automatically turn off the cooking area and you will 

hear a beep that can be turned off by pressing any of 

the commands. To disable the timer, press the keys 

H

and 

I

 of the timer.

• EGG TIMER / REMINDER

To set a ‘reminder time’ press simultaneously the 

C

  and  

D

 key. The led located at the bottom-center of the timer 

display  will  be  flashing.  Set  the  ‘reminder  time’  (from 

1

to 

99

 minutes) by pressing the 

C

 or  

D

 key. An acoustic 

signal will indicate the ‘reminder time’ expiration. Press 

any key to stop the acoustic signal. The egg timer 

remains active even if the appliance is switched off. In 

order to disable the egg timer press simultaneously the  

C

 and  

D

 key to enter the egg timer function. Press the  

D

 key until reaching position  . 

• RECALL

When the appliance has been switched off by mistake it 

is possible to quickly recall the previously active settings 

by pressing the on-off 

A

  key withing 6 seconds, then 

pressing the 

C

 key within another 6 seconds. If the recall 

function is available the relative led 

C

 will be enlighted 

when the appliance is swithcehd on again.

• CONTROL PANEL LOCK 

It is possible to block the controls to prevent the risk 

of  unintentional  modification  of  the  settings  (children, 

cleaning etc.).  By pressing the 

B

    key, the controls are 

blocked and the relative warning light

switches on. 

To release the controls and change the settings 

(e.g.interrupt cooking), the 

B

 key must be pressed. The 

cooking top can however be switched off even when the 

controls block is activated. In this case the controls block 

remains active when the top is switched on again.

• RESIDUAL HEAT 

If the temperature of the cooking zone is still high (over 

50°) after it has been switched off, the relative display will 

indicate the   symbol (residual heat). The symbol will 

only switch off when the burn risk in no longer present.

• POT DETECTION

If the symbol   should appear on one of the cooking 

area displays, it means that: 

1)The recipient being used is not suitable for induction 

cooking.

2)The diameter of the recipient used is inferior to that 

allowed by the appliance.

3)  No recipient is present.