WEISSGAUFF HV 604 TC - Инструкция по эксплуатации - Страница 6

I f once the appliance is installed there is access to 
the lower part, a protection panel (wooden or some-
thing similar) ought to be placed at the distance indi-
cated in the figure.

Electrical connection

Prior to carrying out the electrical connection, please 
ensure that:
the plant charac- teristics are such as to follow what 
is indicated on the matrix plate placed at the bottom 
of the working area;
- that the plant is fitted with an efficient earth
connection, following the standards and law
provisions in force.
- The earth connection is compulsory in terms of
the law.
Should there be no cable and/or plug on the equip-
ment, use suitable absorption material for the wor-
king temperature as well, as indicated on the matrix 
plate. Under no circumstance must the cable reach 
a temperature above 50°C of the ambient tempera-
ture.
Insert in the fixed wiring a mean for disconnection 
from the supply mains having a contact separation in 
all poles that provide full disconnection under over-
voltage category III conditions, in accordance with 
the wiring rules. The plug or omnipolar switch must 
be easily reached on the installed equipment.
This appliance is not intended to be used via an ex-
ternal timer or a remote control system.
The manufacturers decline any responsibility in the 
event of non-compliance with what is described 
above and the accident prevention norms not being 
respected and followed.

To avoid all risk, if the power cable becomes dama-
ged, it must only be replaced by the manufacturer, 
by an authorised service centre, or by a qualified 
electrician.