Wolf ICBCI152T/S - Инструкция по эксплуатации - Страница 7

wolfappliance.com   

|

   7

BOOST MODE (INDUCTION)

For induction cooktops, boost mode boosts power on one 
element by diverting power from an adjacent element. If 
the adjacent element is on high, the power output will be 
reduced. The reduction in power will be displayed on the 
power level indicator of the adjacent element. 

 will 

illuminate when an element is in boost mode.

Boost mode will deactivate automatically after 30 minutes of 
continuous operation and can be reactivated if desired.

SINGLE ELEMENT AND INNER ZONE

Setting controls:

1

   To activate a heating element, touch 

 for desired 

single element on the control panel. Power level indicator 
will flash and all indicators for that zone will flash. 

2

   To complete the activation, touch 

 for highest heat, 

 for lowest heat, 

 (induction) to activate boost 

mode, or touch desired power level indicator.

3

   To change heat setting while the element is on, touch or 

slide to desired power level.

4

   To turn element off, touch 

.

IMPORTANT NOTE:

 For induction cooktops only, if no 

cookware or an incompatible pan is placed on an induction 
element after activation, the control will flash for 30 sec-
onds, then the element will turn off automatically.

Cooktop Operation

CONTROL PANEL LOCK

The control panel lock feature prevents unwanted cooktop 
operation. Touch and hold   for three seconds to lock and 
unlock the control panel.   will illuminate when the control 
panel is locked.

The control panel will automatically lock after 10 minutes 
of inactivity. This automatic lock feature can be disabled 
through the extended options menu. Refer to page 10.

When the cooktop is powered up for the first time and after 
a power outage, the cooktop will default to lock mode.

COOKTOP OPERATION

POWER LEVEL INDICATOR

When an element is activated, a power level indicator will 
illuminate above the corresponding control indicating the 
level of heat. The lowest heat is represented by the small 
flame, varying levels of heat by additional indicators (dots), 
and the highest heat by all indicators including the large 
flame. Refer to the chart below.

SETTING

POWER LEVEL

USES

Melt

1 (small flame) 
indicator

Melting butter, holding 
chocolate and sauces.

Simmer

2–6 indicators

Simmering sauces and 
steaming rice.

Medium

6–7 indicators

Making French toast and 
pancakes, heating milk, cream 
sauces, soups and gravies.

Medium  
High

7-8 indicators

Sauteing, browning and 
frying.

High

8–10 (large flame)
indicators

Boiling water, searing meat 
and canning.