Gaggenau VG 232-232 - Инструкция по эксплуатации - Страница 13

12

7.1 Important notes

Please observe the 

safety notes

and the

important notes

(Chapter 1).

The installing technician is responsible for perfect
functioning of the appliance at its installation
location.
He must explain the operating principle to the user
with reference to the operating instructions and
must show how to switch of the electricity and gas
whenever required.

Caution:

Before connecting the appliance, please check
whether the

local connection conditions

such as

the gas type, gas pressure and mains voltage and
the appliance settings are correct. Refer to the
adhesive label on the gas connection or the 

rating

plate

for the necessary information. This gas hob

conforms to the categories that are specified on the
rating plate. The rating plate can be found on the
appliance and additionally on the enclosed adden-
dum sheet. By replacing nozzles, it is possible to
set the appliance to any gas listed on the rating
plate.
If the data should not agree, the appliance must 
be set to the required gas type and the available
pressure.
As this gas hob is not intended for connection to an
exhaust gas system, pay attention to the applicable
installation conditions.

Note on ventilation:

To ensure good combustion, the room in which this
appliance is installed must have a minimum volume
of 10 m

3

and a door that opens out to outdoors or a

window that can be opened.

In Germany, the gas hob must be installed and
connected by a fitter who has been approved by
the gas supply company. At the same time, the
guidelines such as DVGW-TRGI 86 and TRF 1988
and the regulations of the gas supply companies
and of the responsible authorities must be observed.

In Switzerland, the respectively applicable regula-
tions of SVGW and of the Association of Cantonal
Fire Insurance Companies as well as the manu-
facturer's installation conditions must be observed
when installing the appliance.

In Austria, the ÖVGW-TR Gas (G1) and ÖVGW-TR
Flüssiggas (G2-Part 1) regulations and the local
construction and trade regulations must be
observed when installing the appliance.

The appliance may be installed in kitchen
combinations made of wood or similar combustible
materials without taking additional measures. The
rear wall must consist of non-combustible material.

A minimum distance of 

150 mm

from heat-sensitive

items of furnishing or contact surfaces (cupboard
side panel) must be observed.

The hob conforms to appliance class 3 and must be
installed in the worktop as shown in the installation
sketch.

The distance between the suspended cupboard
and the worktop must be at least 

600 mm

. 

Attention must be paid to the manufacturer's
specified safety clearance when a vapour extractor
is installed.
Wall trims must be heat-resistant, and the minimum
distance between the hob and the wall trim is at
least 

35 mm

.

After unpacking, check the appliance for any
transportation damage and report this immediately
to the transportation company.

Technical modifications reserved.

7. Assembly instructions

VG 232-...

FDxxxx

AC 220-240V

50/60Hz  

Qn      4.7 kW

0.8 VA