Fulgor Milano FSH 905 ID TS WH - Инструкция по эксплуатации - Страница 25

25

GB

Activating automatic heating (or 
“heat-up” function)

Press and hold an area of the cursor for 
the cooking area that is working for about 3 
seconds until you hear a beep (such as 1/3 
of the length of the cursor area).
For example: Select level 3 and activate the 
automatic heating function by pressing your 
finger for 3 seconds. The corresponding 
display shows the letter “A” alternating with 
“3”. With these settings, the cooking surface 
heats the cooking area at the maximum 
level “9” for 2 minutes and then continues 
cooking level at level “3”.

Power 

Level

Duration 

Automatic 

Heating 

Function (time 

in minutes)

Maximum 

Duration 

of Working 

Time without 

Commands 

(time in 

minutes)

0

-

1

0’ 40”

516

2

1’ 12”

402

3

2’

318

4

2’ 56”

258

5

4’ 16”

210

6

7’ 12”

138

7

2’

138

8

3’ 12”

108

9

-

90

P

-

10

Extension function
(For large pans)

This function facilitates cooking with large 
rectangular pans, is only available for the 
rectangular cooking areas and is activated 
by simultaneously pressing the 2 cursors of 

display of the selected cooking area shows 
a “P”. The Booster function can be activated 
by pressing at the end of the cursor of the 
cooking area (11).
The power increase is different depending 
on the size of the cooking area:
1)  For a cooking area with a diameter of 

145 mm, the power goes from a level 9 
of 1400 W to the Booster level of 2200 
W for 10 minutes.

2)  For a cooking area with a diameter of 

180 mm, the power goes from a level 9 
of 1850 W to the Booster level of 3000 
W for 10 minutes.

3) 

For a rectangular cooking area 
(220x190), the power goes from a level 
9 of 2100 W to the Booster level of 3700 
W for 10 minutes.

4)  For a cooking area with a diameter of 

260, the power goes from a level 9 of 
2600 W to the Booster level of 3700 W 
for 10 minutes For safety reasons, the 
Booster function has a limited duration.

If during pot is removed from the cooking 
area during the Booster time, the Booster 
remains active and the Booster time is not 
deactivated.
With the Booster activated, changing the 
value set with your finger in the cursor area 
deactivates the Booster.
The Booster function “P” can be activated in 
all cooking areas, but priority is given to the 
last Booster activated, reducing any other 
cooking levels.

Automatic preheating
(or “heat-up” function)

This feature makes cooking easier. You do 
not need to be permanently present during 
cooking: the surface automatically heats 
up at Full Power and then returns to the 
selected power level after a certain time 
(see Table 1).