Fulgor Milano CPH 401 ID X - Инструкция по эксплуатации - Страница 16

16

17

GB

Operating principle

This is based on the electromagnetic 
properties of most cooking containers. 
The electronic circuit governs the operation 
of the coil (inductor), creating a magnetic 
field. 
The heat is transmitted by the container to 
the food. 
Te cooking process takes place as follows: 

- minimum dispersion (high performance);
- the removal of the pan (simply lifting it) 

automatically stops the system;

- the electronic system allows maximum 

flexibility and precision of regulation. 

Installation

All installation operations (electrical 
connection) must be carried out by people 
qualified in compliance with the laws in 
force. 
For specific instructions, see the installation 
section. 

Important

This apparatus is not suitable for use by 
person (children included) with reduced 
mental and physical capacity or with lack of 
experience and knowledge unless having 
previously received suitable training fot its 
use by persons responsable for their safety.

It must be ensured that children do not play 
with the apparatus.

Use

First of all, position the pan in the chosen 
cooking area. 
The absence of the pan display   means 
the system cannot start. 

Cooking and power levels

The cooking and power levels of the 
cooking zones are shown on the display 
with 7 allotted segments. In accordance with 
standards, the power levels are displayed 
with numbers from “1” to “9”.

Residual heat indicator

Indicates to the user that the glass is at 
a dangerous temperature if in contact 
with the area over the cooking zone. The 
temperature is determined by means of a 
mathematical model and possible residual 
heat is indicated by “H” on the corresponding 
7 segment display. 
Heating and cooling are calculated based 
on:

- The selected power level (from “0” to “9”);
-  The relay activation time after the cooking 

zone has been switched off.

The corresponding display shows “H” until 
the zone temperature drops below the 
critical level (< 60 °C) according to the 
mathematical model. 

Turning the cooking surface on 
and off

The electronics are activated by turning 
the knob. You will hear a short beep. A 
display in the glass front shows the setting 
of the cooking surface (a value from 0-9 
proportional to the rotation of the knob) or 
the symbol “u”, meaning there is no pan, “H” 
for residual heat an error message.
If a suitable pan is not placed on the cooking 
surface within 10 minutes after turning the 
knob, surface will go into standby mode with 
the display turned off and there will be a 
short beep; to use the cooking in this mode, 
you have to turn the knob back to position 
0 and, while you are turning it, the display 
will show “-”.

User instructions