Fulgor Milano CH 904 ID TS - Инструкция по эксплуатации - Страница 38

38

39

GB

be activated. The power button only can be 
used (Power) to turn off the Touch Control 
(and restart the procedure).

Permanent unlock

The hob zone display of the front right hob 
zone (FR) and the special Power Booster 
(P) must be simultaneously pressed, then 
press the special Power Booster again.
This procedure must be completed within 10 
seconds and no other key must be pressed 
except for that mentioned. The Touch 
Control remains in the Off mode (all displays 
are blank), failing which the procedure is 
cancelled and the Touch Control switches 
to Off mode after 20 seconds.
If the control unit is activated by pressing 
the ON/OFF key, all displays will show the 
“0” symbol, the dots on the display continue 
to flash and the command unit can be used 
for cooking. In the presence of the hot hob 
zone warning lights [H], this message is 
displayed alternately with [0] and at the 
same time with the dot on the display.

Acoustic signalling (buzzer)

The following activities carried out during 
the operation of the Touch Control are 
signalled by a buzzer:

– Single brief acoustic signal for the regular 

activation of a key. The acoustic signal is 
only emitted on the first activation for the 
Slider area. No acoustic signal is emitted 
during the modification of the values.

– A longer intermittent acoustic signal for 

the permanent use of the keys for a more 
prolonged period (> 10 seconds

– Timer time-out

Timer function

There are two different types of timer 
function available:

– Independent Timer 1.99 minutes: 

acoustic signal with timing. This function 
can be activated only if there are no other 
hob zones functioning (all levels = 0). If 
any of the hob zones are activated (level 
>0) the independent timer remains active. 
If the timer must be used to switch off a 
cooking area (see timer for cooking area), 
then the command must first be turned off 
and on.

– Hob zone timer 1.99 minutes: This 

function can be activated as long as a hob 
is on (level < 0; dot on the display). Four 
cooking areas to be deactivated are freely 
programmable timer and beep.

Setting a timer value

– Adjustment by means of the slider area.

– The adjustment of the first digit usually 

occurs first, followed by the adjustment of 
the second digit.

– Within 10 seconds after setting the second 

digit, the value might reset (the dot on the 
timer display and when there is a specific 
timer for a hob zone the assigned LED 
flashing).

– For the display of the active timer, the 

timer value can be set to [0] by directly 
pressing [0] on the slider (left side).

Deactivation of an active timer

– A timer can be deactivated by setting the 

value to 0.

– An independent timer can be deactivated 

through the double activation of the power 
key (1st TC active, 2nd TC and Timers 
off).