Fulgor Milano CH 904 ID TS BK - Инструкция по эксплуатации - Страница 32

32

33

GB

Functions

Switching the Touch Control ON/OFF

After switching on the power, the touch 
control takes about 1 second before it is 
ready to use. After a reset all displays and 
LEDs glow for approx. 1 second. When this 
time is over all displays and LEDs extinguish 
and the control is in the stand-by mode.
By operating the ON/OFF key the control 
can be turned into the ON-mode. The 
cooking zone displays show a static “0”. If 
a cooking zone is in the “hot” status, the 
display shows a static “H” instead of “=”. 
The lower right corner of all cooking point 
displays flash at one-second intervals to 
indicate that no cooking areas has been 
selected at the time.
After switching ON the electric control 
remains activated for 20 seconds. If no 
cooking zone or timer selection follows 
within this period of time, the electronic 
control automatically switches back into the 
stand-by mode.
The control can only be switched ON if it 
identifies the ON/OFF key alone being 
operated. Should it recognize key activation 
other than that, the control remains in the 
stand-by mode.
If the child safety feature is active when 
switching on, all cooking zones show “L” 
(LOCKED). If the cooking zones are in a 
“hot” status, the display shows “L” and “H” 
in alternation.
When the Touch Control is ON it can be 
switched OFF at any time by operating the 
ON/OFF key. This is also valid if the control 
has been locked (activated child safety 
feature).
The ON/OFF key has always priority in the 
switch-OFF function.

Automatic switch-OFF

When the control is ON it automatically 
switches OFF after 20 seconds if no cooking 
zone or select key has been operated within 
this period of time. In the case of a cooking 
selection, the automatic switch-OFF time is 
composed of 10 seconds deselection time for 
a cooking zone at setting “0” and 10 seconds 
switch-OFF time.

Hob zone On/Off

With the Touch Control on, a hob zone 
can be selected by touching the dedicated 
display (6). The corresponding display them 
shows the fixed spot on the display and “0” 
rather than “H” – for very hot hob zones. The 
spots disappear on the display for all other 
hob zones.
At this point the cooking level can be selected 
by means of the Slider. In this way the 
corresponding hob zone is activated. The 
maximum and minimum values are “9” (to the 
right) and “0” (to the left).

Turning a single hob zone off

A single hob zone can be turned off by 
selecting a cooking level [0]. If a hot hob zone 
warning light is on [H], this signal is alternately 
displayed with [0] and simultaneously with 
the spot on the display.
Once the Touch Control is turned off, the 
display remains black or the symbol [H] is 
displayed as a warning of a hot hob zone.
Switching OFF all cooking zones
Immediate switching OFF of all cooking 
zones can be achieved anytime by means of 
the ON/OFF key. Once the Touch Control is 
switched off, the display remains off or the 
system [H] is displayed as a warning that the 
cooking area is hot.