Barazza 1PIDC120N - Инструкция по эксплуатации - Страница 20

20

GENERAL INFORMATION      

Carefully read this use and maintenance manu-

al, where important information about installation, 

use and maintenance safety is provided. Keep 

this manual for future reference. Any installation 

operation (electric connections) shall be per-

formed by specialized personnel, in compliance 

with all standards and regulations in force.

SAFETY  WARNING                                                                                                                                         

The use of flat-bottomed pots, 

with a diameter equal to or slight-

ly bigger than the heated area, 

is recommended. (Fig.6). Do 

not use pots that have a rough 

base, in order to prevent the 

hob thermal surface from being 

scratched. This appliance is not 

intended for use by children or in-

firm people without supervision.

IMPORTANT                                                                                                                                            

-  Avoid the overflow of liquids 

by reducing the heat supply 

when boiling or warming liq-

uids.

-  Do not leave any heating ele-

ment switched on, if there are 

no pots, or if the pots are emp-

ty.

-  Once cooking is completed, 

turn the concerned heating el-

ement off, by using the control 

shown below.

-  This appliance is not intended 

for use by people (children in-

cluded) with limited physical, 

sensorial or mental abilities, 

or lacking of experience and 

knowledge, unless they are 

supervised or well instructed 

about the use of the appliance, 

by a person who is responsi-

ble for their safety.

- 

Children should be super-

vised to assure that they do 

not play with the appliance.

-  If the hob surface is cracked, 

turn the appliance off and dis-

connect it from the electric 

network , so as to avoid the 

possibility of electric shock.

INSTALLATION                           

INSTRUCTIONS   

These installation instructions are intended for a  

specialized installer and are meant as guidelines 

for the hob installation, adjustment and mainte-

nance, in compliance with any regulations and 

standards in force. If a built-in oven or any other 

appliance generating heat is to be mounted direct-

ly under the vitro-ceramic hob, 

IT IS NECESSARY 

THAT SUCH AN APPLIANCE (the oven) AND THE 

VITRO-CERAMIC HOB ARE PROPERLY INSULATED

. 

Failure to comply with this precaution might result 

in the incorrect operation of the TOUCH CON-

TROL system.

•  Positioning:

This household appliance has been designed for 

built –in installation onto a worktop, as shown in 

the figure (Fig. 1- Cut dimensions). Use sealing 

material along the whole perimeter (Fig.2). This 

operation is necessary in order to prevent any liq-

uid from entering inside the hob, being that the 

flatness of the top, the glass and their coupling 

cannot be assured. Gently push the appliance 

into the built-in hole (Fig.4). If, after installation, 

the lower part of the appliance is accessible from 

the lower part of the cabinet, it will be necessary 

to mount a spacing panel at the distances given 

(Fig.3). 

Induction Hob

|

User instructions

EN