Smeg P106 - Инструкция по эксплуатации - Страница 14

Instructions for the user

31 

8.

Cleaning and maintenance 

Never use a steam jet to clean the appliance.

Before any intervention, disconnect the power supply of the device.

8.1

Cleaning stainless steel 

To keep the hob in good condition, you should clean it after every use (after it has 
cooled). 

8.1.1

Regular daily cleaning of the hob 

To clean and preserve the stainless steel surfaces, always use 

only

 specific products 

that do not contain abrasives or chlorine-based acids. 

How to use:

 pour the product on a damp cloth and wipe the surface, rinse thoroughly 

and dry with a soft cloth or deerskin. 

 
8.1.2

Food stains or residues 

Do not

 use metallic sponges or sharp scrapers: they will damage the surface.  

Use normal, non-abrasive products for steel together with non-scratch 
sponges and, if necessary, wooden or plastic utensils. 

Rinse thoroughly and dry with a soft cloth or deerskin. 

8.2

Cleaning of components 

8.2.1

Knobs 

The knobs are made of stainless steel and therefore should be cleaned in the same 
way as the hob. 

8.2.2

Grids and burner caps 

In normal use of the hob, the grids and burner caps normally get browned as a result 
of the high temperature. For optimum cleaning remove the burner cap and lift up 

one 

of the horizontal spokes

 of the grid to remove it from its housing. Clean these details 

with a fine abrasive sponge or similar products found on the market. Then redo with 
specific polish to make the steel shiny. 
Reassemble the burner caps on their flame caps. When replacing the grids, make 
sure that pins 

C

 are aligned with their seats on the hob, then press them in with the 

palm of your hand until they lock in place. 
CAUTION: do not wash these components in a dishwasher. 
Your local authorised after-sales technician is able to supply professional products for 
appliance cleaning and care. 

8.2.3

Flame cap crowns 

The flame cap crowns are removable. Wash them with hot water and non-abrasive 
detergent. Be careful to remove all deposits. 
When you replace them, make sure that they are completely dry and inserted correctly 
in their housings (see Section “7 Using the hob ”). 

8.2.4

Ignition plugs and safety devices 

For good functioning of the lighting ignition plugs and the safety devices, keep them 
very clean. 
Check frequently and clean with a damp cloth when necessary.