Smeg P106 - Инструкция по эксплуатации - Страница 13

Instructions for the user

30 

7.

Using the hob 

Check that the flame cap crowns, the burner caps and grids 

are correctly assembled. 
Pins 

A

 of the flame cap crowns must be inserted in housings 

B

 of the burner rings, and pins 

C

on the grids must be 

blocked in their respective housings on the hob. 

7.1

Burner lighting with safety device 

Each knob shows the burner it is for (the example at the side corresponds to the front 
left burner).  
 
The appliance is equipped with an electronic lighter. Just press and simultaneously 

turn the knob anticlockwise to the minimum flame symbol   until the burner lights. 
Keep the knob pressed down for about 2 seconds to keep the flame alight and 
activate the safety device. It may happen that the burner goes out when the knob is 
released. In this case, repeat the operation, keeping the knob pressed down for a 
longer time.  

If the burners should go out accidentally, after a roughly 20 second interval the safety 

device intervenes to block gas flow, including when the tap is open. 

7.2

Practical advice for using the burners 

For better burner performance and minimum gas consumption, flat 
bottomed, even recipients must be used, with covers and 
proportional in size to the burners (see paragraph “7.3 Diameter of 
containers ”). 
 
To avoid overcooking or damage to the surface top while cooking, all 
recipients or griddles must be positioned within the cooking hob 
perimeter and must be a minimum distance of 

3-4 cm

from the 

knobs.  
 

7.3

Diameter of containers 

BURNERS 

 
1

Auxiliary 

2

Semi rapid 

3

Medium rapid 

4

Large rapid 

5

UR 

Ø min. and max. (in cm) 

7-18 

10-24 
18-24 
20-24 
20-28