Simfer H45L35W516 - Инструкция по эксплуатации - Страница 15

15

WARNING:

 Gas hose and electric connection of the appliance should not 

pass next to hot areas such as back of the appliance. Gas hose should be 

connected by making wide angle turns against breaking possibility. Movement 
of appliance whose gas connection is made may cause gas leakage. 

For natural gas connection;

Transformation from natural gas to LPG and from LPG to natural gas
1.

 Turn off gas and electricity of the cooktop. If your cooktop is hot, wait 

for cooling down.

2. 

For injector change, use a screwdriver whose edge is as the figure 1. 

3.

 As seen in figure 2, demount burner lid and burner of the cooktop and 

ensure visibility of injector. 

4.

 Remove injector by turning as shown in figure 3 with screwdriver and 

replace it with a new one.

Correct

Incorrect

Correct

Correct

Main gas pipe

Gasket
Nut

Natural gas 
Connection hose

WARNING: 

Natural gas connection should 

be done by authorized service. 
For natural gas connection, place gasket 
in the nut at the edge of natural gas connection 
hose. To install the hose on main gas pipe, 
turn the nut. Complete the connection by 
making gas leakage control.

Figure 1

Figure 2

Figure 3