Simfer H45L35W516 - Инструкция по эксплуатации - Страница 13

13

Electrical Connection
1. 

Setting conditions of this appliance is indicated in tag or data plate.

2. 

Your appliance should be plugged in a fuse appropriate for electric 

power. If necessary, it is recommended that installation is done by 

authorized service.  

3. 

Your appliance is configured in accordance with electrical supply of 

220-240V 50/60Hz.

4. 

If main electrical network is different from these values, contact with 

your authorized service. 

5. 

Electrical connections of your appliance should only be made to  the 

fuses having suitably wired grounding (grounded) system. If no   convenient 

fuse is available in the place where your appliance is to be installed, 

contact  with  authorized  service  immediately.  Manufacturing  firm  is  not 

responsible definitely for the damages that fuses whose grounding is not 

made and connected to the appliance can cause.

6. 

Plug of the appliance should be close to be accessed easily to the 

fuse whose grounding is made without use of extension cord.

7. 

Do not allow contacting the power cable of your appliance with hot 

regions. Similarly, keep away it from sharp edges and corners. 

8. 

If feeder cord is damaged, this cord should be replaced either by 

manufacturer or its service agency or same degree qualified personnel in 

order to hinder a dangerous situation. 

9. 

Wrong electrical connection may give damage to the appliance.In 

this case, your appliance will remain out of guarantee scope. Electrical 
connection of your appliance should be done by authorized service. 

Electrical connection scheme

Get electrical connection of your appliance done to authorized person in 

line with the following scheme.

L1

220-240 V 

~ 

50/60 Hz

H05 VV-F 3G 1.5 mm²

Earth

Terre 

Erdung

Neutral

Neutre