MONSHER MHE 6002 - Инструкция по эксплуатации - Страница 38

English

38

CONNECTING THE HOB TO THE MAINS POWER SUPPLY

All installation work must be carried out by a  competent 

person or qualified electrician.

Before connecting the mains supply ensure that the mains 

voltage corresponds to the voltage on the rating plate inside the 

cooker hood. Warning: THIS APPLIANCE MUST BE ARTHED.

 This hob must be connected to the mains power supply only by a suitably qualified 

person. 

Before connecting the hob to the mains power supply,check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate
3. The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply,do not use adapters,reducers or branching
devices,as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 180

0

C at any point.

 Check with an electrician whether the domestic wiring system is suitable without 

alterations.Any alterations must only be made by a qualified electrician.

This appliance is supplied with a 3 core mains cable coloured as follows:
Brown = L or Live
Blue = N or Neutral
Green and Yellow=E or Earth 

This appliance requires a 32 Amp Miniature Circuit Breaker.

;

If the cable is damaged or to be replaced, the operation must be carried out the by after-
sale agent with dedicated tools to avoid any accidents.

;

If the appliance is being connected directly to the mains an omnipolar circuit-breaker must 
be installed with a minimum opening of 3mm between contacts.

;

The installer must ensure that the correct electrical connection has been made and that it 
is compliant with safety regulations.

;

The cable must not be bent or compressed.

;

The cable must be checked regularly and replaced by authorised technicians only.