MONSHER MHE 6002 - Инструкция по эксплуатации - Страница 34

English

34

TROUBLE SHOOTING

Before calling the customer services,please check that the appliance is  correctly 

connected,any of the following cases are not covered by the  guarantee

;

Damage caused by improper use,storage or maintenance. 

;

Damage caused by unauthorised disassembly and repair. 

;

Damage caused by misuse.

;

Using the ceramic hob for commercial purposes.

If an abnormality comes up,the ceramic hob will enter the protective state automatically and 

display corresponding protective codes:

Ceramic Hob

Error 

Code

Possible Cause

What to do

ER03

Water or pot cover the user interface

Clean the user interface

H

When in standby state "H" and "0" 

repeatedly display, when off: always 

display "H"

High temperature notice is the normal 

notice.It will disappear automatically 

when the temperature drops.

E 

The temperature inside too high

Please contact the supplier to reconnect 

the thermocouple.

E7

The glass surface of the appliance is 

too hot

Stop and cooling the appliance

The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the 

ceramic hob and please contact the supplier.

Please note! 
The following shall not be considered as defects of the Product

Induction and 

electric cooktops

Sound of working of induction cooking zones at activation of increased 

power 
Dark, visually non-luminous segment of the thermostat on a glass 

ceramic cooking zone 
Discoloration of desktop surface when using the product