KUPPERSBERG FQ 63 B (MULTI) - Инструкция по эксплуатации - Страница 34

34

TECHNICAL PASSPORT

ENGLISH

Gas hob

U S I N G  I N S T R U CT I O N S

Warning

Â

  Не  вносите  никаких  измене

-

ний  Do not modify this appliance.

Â

 This appliance must be 

installed by an authorised technician or 
installer.

Â

 Prior to installation, ensure 

that the local distribution conditions 
(nature of the gas and gas pressure) 
and the adjustment of the appliance are 
compatible.

Â

  The adjustment conditions for 

this appliance are stated on the label 
(or data plate).

Â

  This appliance is not connected 

to a combustion products evacuation 
device. It should be installed and 
connected in accordance with current 
installation regulations. Particular 
attention should be given to the relevant 
requirements regarding ventilaton.

Â

 Before installing, turn off 

the gas and electricity supply to the 
appliance.

Â

  All appliances containing any 

electrical components must be earthed.

Â

  Ensure that the gas pipe and 

electrical cable are installed in such a 
way that they do not touch any parts of 
the appliance which may become hot.

Â

Gas pipe or connector 

shouldn’t be bent or blocked by any 
other appliances.

Â

  Check the dimensions of the 

appliance as well as the dimensions of 
the gap to be cut in the kitchen unit.

Â

 The panels located above 

the work surface, directly next to the 
appliance, must be made of non-

flammable  material.  Both  the  stratified 

surfacing and the glue used to secure 
it should be heat resistant, to prevent 
deterioration.

Â

  Turn on appliance tap and light 

each burners. Check for a clear blue 

flame without yellow tipping. If burners 

shows any abnormalities check the 
following :

– Burner lid on correctly
– Flame spreader positioned 

correctly

– Burner vertically aligned with 

injector nipple

Â

 A full operational test and 

a test for possible leakages must be 
carried

Â

out by the fitter after installation.

Â

  The flexible hose shall be fitted 

in such a way that it cannot come into 
contact with a moveable part of the 
housing unit and does not pass through 
any space susceptible of becoming 
congested.

Â

  Grease cranes produced at the 

factory to meet the requirement of all 
life hob.