KUPPERSBERG FQ 63 B (MULTI) - Инструкция по эксплуатации - Страница 30

30

TECHNICAL PASSPORT

ENGLISH

Gas hob

Â

The  appliance  is  fitted  with  a 

flame  failure  safety  device  on  each 

burner, which is designed to stop the 

flow  of  gas  to  the  burner  head  in  the 
event of the flame going out.

To ignite a burner:

Â

  Press in the control knob of 

the burner that you wish to light and 
turn it anti-clockwise to the maximum 
position.

Â

  If you keep the control knob 

depressed, the automatic ignition for 
the burner will operate.

Â

 You should hold down the 

control knob for 15 seconds after the 

flame on the burner has lit. If after 15s 

the burner has not lit, stop operating 
the device and open the compartment 
door and/or wait at least 1 min before 
attempting a further ignition of the 
burner.

Â

  After this 15-second interval, to 

regulate the flame you should continue 

turning the control knob anti-clockwise 

until  the  flame  is  at  a  suitable  level. 

The operating position MUST be at a 
position between the maximum and 
minimum position.

Â

  To switch the burner off, turn 

the control knob fully clockwise to the 
gas off position.

Â

  In case of power failure, the 

burners can be lit by carefully using a 
match.