Kuppersberg FA9RC Gold - Инструкция по эксплуатации - Страница 12

12

TECHNICAL PASSPORT

ENGLISH

Electric Hob FA9RC

Cancelling the safety function

The safety function must be 

deactivated after the appliance has 
been connected, following the steps in 

fi gure B. Firstly press the on button (step 

1). Then simultaneously press the touch 
buttons   and 

 shown in the fi gure 

(step 2). Next, press the power decrease 
button 

 (step 3). The touch buttons 

that you need to press vary depending 
on whether the appliance has four or 

fi ve hot plates.

When the control is reactivated, the 

appliance will be ready to start cooking. 
In the event of a power cut, the lock 
function (if activated) will be cancelled.

Figure B:

Power surges

When the touch control system is 

subjected to a higher voltage than the 

usual ranges allowed in power grids, 

the hot plates will disconnect and a 

continuous beep will be heard. The 

following  message  fl ashes  on  the  hot 

plate displays *:

 400

When the nominal voltage is 

reestablished, the beeping stops and 

the message on the displays disappears. 

The hot plates remain disconnected and 

the 

H

 indicating residual heat remains 

on the displays if these were on before 

the surge. The appliance is then ready 

to be used.

The touch control detects these 

power surges whenever the appliance is 

connected to the mains, even if it is not 

being used at that moment. The alarm 

described above might therefore be 

activated even when the touch control 

is switched off.