Korting HK 6002 X - Инструкция по эксплуатации - Страница 19

O  = 

Heating plate with active timer function indicator.

Cooktop Ignition:

- Verify that "B1" led is off before turning the equipment on; 

otherwise,  turn  it  off  by  pressing  the  "B"  key  button  for  ap-

proximately 2 seconds.

- Next, select the "A" button.

- All  "G"  displays  will  show  a ‘0’  for  about  10  seconds.  If  no 

action is taken during this period, the cooktop will go off.

Heating Plate Ignition:

- A heating plate can be turned on by selecting one of the "E" 

buttons. A blinking zero will appear on the display.

- Use "+" or "-" buttons to regulate the power level. If the "+" 

button is selected, the display will show power level 1. If the 

"-" button is selected, the display will show power level 9.

- After this, power level can be regulated by pressing the "+" 

or "-" buttons.

Turning off the heating Plate:

- Select the appropriate heating plate by pressing the "E" but-

ton. The display will start blinking.

- Use the "-" button to set power level to zero.

OR

- Select the heating plate by pressing the "E" button and the 

display will start blinking.

- Press the "+" and "-" buttons simultaneously.

You  can  turn  off  all  the  heating  zones  simultaneously  by 

pressing the ON/OFF button.

Double Plate Function:

- The double plate function is only activated, depending on 

the model, on the "E1-E3" heating plates.

- Select and adjust the power level as described in "Heating 

Plates Ignition" section.

- Select the "F" button.

- After activating the double plate, a "F1-F3" fixed led will ap-

pear near the display of the previously selected plate.

To deactivate this function, follow the instructions below:

- Select the plate using the "E1-E3" button.

- Press the "F" button to deactivate this function. The "F1-F3" 

led will go off at the same time. 

Triple Plate Function:

- The triple plate function is only activated, depending on the 

model, in the "E3" heating plates.

- Select and adjust the power level as described in the "Heating 

Plates Ignition" section.

- Select the "F" button.

- After activating the triple plate, an "F3" blinking led will ap-

pear near its corresponding display.

- Select the "F" button again to activate the triple plate.

- At this point the "F3" led will be fixed.

To deactivate this function, follow the instructions below:

- Select the plate using the "E3" button.

- Press the "F" button to deactivate this function, and the led 

near the display starts blinking.

- Next the double heating zone will operate again.

Residual Heat Function:

- When the "E" heating plate is in position ‘OFF’, and the glass 

surface temperature is above 50 ºC, a light indicator appears 

on the "G" display of the heating plate:

1)  If  other  plates  are  still  operating,  the  display  shows  an 

alternating "0" and "H";

2)  When  the  equipment  is  in  the ‘OFF’  position,  the  display 

shows a fixed "H".

Key Function 

(Fig.4B)

:

To  prevent  children  or  people-  requiring  supervision-  from 

using  the  cooktop,  all  functions  can  be  blocked  with  the 

"B" button.

To  activate  or  deactivate,  press  the  "B"  button  for  approxi-

mately  2  seconds.  The  function  is  activated  when  the  "B1" 

indicator is turned on.

If  the  appliance  is  on  and  the  key  function  is  activated,  the 

ON/OFF button works in the same way.

O.S.D.(Overflow Safety Device) 

(Fig.4):

The cooktop has a safety system that turns all the plates 

OFF

and activates the 

safety lock 

if any liquid or objects are found 

on the control area.

The cooktop goes off automatically.

HEAT UP:

The 

Heat  Up

  function  allows  the  heating  plate  to  be  at 

maximum temperature for a certain period of time; then, the 

temperature drops to a lower selected value.

HEAT UP activation:

- Select the heating zone using the "E" button.

- Set power level to 9.

- Select the "+" button again.

- A "•" decimal point will appear on the display, near the power 

level, for about 5 seconds. During this period select the desired 

power level -between 1 and 8- to be reached within a short 

period of time.

- If you select power level 9 the function will be cancelled.

- When the heat up function is activated, it is possible to raise 

the temperature level selected before.

- When the function is over, an acoustic BEEP signal is heard. 

After the acoustic signal, the appliance will continue working 

with the power level set beforehand.

HEAT UP deactivation:

- Select the heating zone using the "E" button.

- Set power level to 9.

- When  the  "•"  decimal  point  on  the  display  disappears,  the 

function is deactivated.

TIMER

 (Fig.4T)

:

This function sets the auto turn-off time (from 1 to 99 minutes) 

for the selected heating plates.

Note:

 The 

Timer

  can  be  simultaneously  activated  in  all  the 

heating plates.

- Select the "E" heating plate.

- Set the power level, from 1 to 9, by pressing the "+" and "-" 

buttons.

- Select the "F" timer button.

- The "O" plates indication led will start blinking.

- Set the desired time using the "+" and "-" buttons.

- After  some  seconds,  the  time  set  will  be  fixed  on  the  "N" 

display and the remaining time will be shown.

- When the time set before is over, the "N" timer display and 

the  "O"  plates  indicator  will  start  blinking  followed  by  an 

acoustic  signal.  This  indicates  that  the  time  set  is  over  and 

that the heating zone is off.

- If  the  timer  is  activated  simultaneously  in  more  plates,  the 

minimum  residual  time  will  appear  on  the  display  with  the 

corresponding heating zone blinking led.

- To deactivate the acoustic signal, press the "T" timer button; 

otherwise, it will be automatically off after about 1 minute.

- To deactivate the blinking light indicator, press the "T" timer 

button.

To deactivate the timer function before the set time, follow 

the instructions below:

- Select the "E" heating zone.

- 19 -