Варочная панель Gorenje ICG 2000 SP - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
35
WHAT TO DO IF TROUBLE OCCURS
Please note
If your appliance is faulty, please check whether you can rectify the problem yourself by consulting these
instructions for use.
But there are some problems described below that you can fix yourself.
The fuses blow regularly?
Contact a technical customer service or an electrician!
You can't switch you induction hob on?
Has the wiring system (fuse box) in the house blown a fuse?
Has the hob been connected to the mains?
Are the sensor buttons partly covered by a damp cloth, fluid or a metallic object? Please rectify.
Are you using unsuitable cookware? See the section on “Cookware for induction hobs”.
Is the cookware you are using making noises?
This is due to technical reasons; the induction hob and the pot are not at risk.
Does the cooling fan still operate after it has been switched off?
This is normal since the electronic unit is being cooled down.
Is the hob making noises (clicking or cracking sounds)?
This is for technical reasons and cannot be avoided.
Does the hob have tears or cracks?
If cracks, fractures or any other defects appear in your glass ceramic hob, immediately switch off the
appliance. Disconnect fuse immediately and call Customer Service.
SYMPTOM
POSSIBLE CAUSE
SOLUTION
Fault code E0.
Internal circuit error.
Contact the service department.
Fault code E1.
Without cookware or incompatible
cookware used.
Please check whether the cookware is not
suitable.
Fault code E2.
Overheating protection on power
mode (>150
°C).
Eliminate the course of overheating. Once the
cooktop has cooled, the appliance can be put
into operation again.
Fault code E3.
Electronic control of excess
voltage (>270V).
Make sure the appliance is connected to the
voltage indicated on the rating label.
Fault code E4.
Electronic control of low voltage.
(<160V).
Make sure the appliance is connected to the
voltage indicated on the rating label.
Fault code E5.
Temperature sensor open or short
circuit.
Contact the service department.
Fault code E6.
IGBT open or short circuit.
Contact the service department.
Fault code E7.
Overheating protection on TEMP.
mode (>240
°C).
Eliminate the course of overheating. Once the
cooktop has cooled, the appliance can be put
into operation again.
GUARANTEE & SERVICE
If you need information or if you have a problem, please contact the Gorenje Customer Care Centre in
your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care
Centre in your country, go to your local Gorenje dealer or contact the Service department of Gorenje
domestic appliances.
For personal use only!
We reserve the right to any modifications!
GORENJE
WISHES YOU A LOT OF PLEASURE WHILE USING YOUR
APPLIANCE
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
