Electrolux EHI 6740 FOK - Инструкция по эксплуатации - Страница 9

4.5 

Bridge function

This function connects two left side

cooking zones and they operate as one.
First set the heat setting for one of the left

side cooking zones.

To activate the function:

 touch  . To

set or change the heat setting touch one

of the control sensors.

To deactivate the function:

 touch  .

The cooking zones operate independently.
When you use only one cooking zone of

the pair we recommend that you use the

rear cooking zone. Also when you use

large cookware we recommend that you

put it near to the rear cooking zone.

4.6 

Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking
zone:

 touch 

 (  comes on).

Immediately touch the correct heat
setting. After 5 seconds   comes on.

To deactivate the function:

 change the

heat setting.

4.7 

Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the

highest heat setting.

Refer to “Technical

information” chapter.

To activate the function for a cooking
zone:

 touch 

.   comes on.

To deactivate the function:

 change the

heat setting.

4.8 

Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the cooking zone then set the

function.

 You can set the heat setting

before or after you set the function.

To set the cooking zone:

 touch 

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function:

 touch   of

the timer to set the time (

00 - 99

 minutes).

When the indicator of the cooking zone

starts to flash slowly the time counts

down.

To see the remaining time:

 set the

cooking zone with  . The indicator of the

cooking zone starts to flash quickly. The

display shows the remaining time.

To change the time:

 set the cooking

zone with  . Touch   or  .

To deactivate the function:

 set the

cooking zone with   and touch  . The

remaining time counts back to 

00

. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and 

00

 flashes. The cooking zone

deactivates.

To stop the sound:

 touch  .

CountUp Timer (The count up timer)

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone:

 touch 

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function:

 touch   of

the timer.   comes on. When the

indicator of the cooking zone starts to

flash slowly the time counts up. The
display switches between   and counted

time (minutes).

ENGLISH

9