VITEK VT-2349 - Инструкция по эксплуатации - Страница 6

Увлажнители VITEK VT-2349 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 36
Загружаем инструкцию
background image

6

ENGLISH

«Night» mode on/off button (16) 

 

 

–  Press  the  button  (16)  on  the  RC  to  switch  the 

“night”  mode  on.  When  you  switch  the  “night” 
mode on, the symbol (24)

 

 will appear on the 

control panel display (5), other readings on the 
display  will  be  flashing  for  several  seconds  and 
then will go out. 

Notes:

–  When you switch the night mode on, the relative 

humidity level automatically sets at 65%.

–  When  the  night  mode  is  switched  on,  the  timer 

continues  to  work  and  when  the  set  time  is 

reached,  the  unit  switches  off  and  goes  into 

standby mode.

–  To switch the “night” mode off, press any button 

on the RC twice. 

You  can  also  switch  the  night  mode  on  with  the 
control panel (5).
To  switch  the  night  mode  on  touch  the  button 
(18) 

  on  the  control  panel  (5)  and  hold  at  least 

5 seconds. To switch the “night” mode off press any 
button twice. 

CLEANING AND MAINTENANCE

WARNING! Always switch the air humidifier off 

and unplug it before cleaning.
Hard  water  causes  appearance  of  mineral  scale 
in  the  process  chamber  (7)  and  in  the  water  tank 
(3) that leads to improper operation of the unit. To 
avoid it:
–  use  filtered  and  settled  water.  If  tap  water  is 

hard,  it  is  recommended  to  mix  tap  water  with 
distilled  water  in  proportion  1:1.  If  tap  water  is 
too hard, mix it with distilled water in proportion 
1:2 or use distilled water only.

–  Using of water with high content of minerals may 

lead  to  white  deposits  on  surfaces  near  the  air 

humidifier  and  it  is  not  a  sign  of  malfunction  of 
the air humidifier.

–  Change water in the water tank (3) twice a week.
–  Thoroughly  wash  the  process  chamber  (7),  the 

float  (9)  and  the  water  tank  (3)  with  neutral 
detergent solution twice a week. 

–  To clean the “sprayer”, add 5-10 drops of deter-

gent on it and wait for approximately 10-15 min-
utes. Remove the scale from the sprayer surface 
and  then  wash  the  process  chamber  (7)  with 
neutral detergent solution.

–  Rinse  the  process  chamber  (7)  and  the  water 

tank (3) several times. Wipe the process cham-
ber (7) and the float (9) with a soft cloth. 

–  Clean  the  humidifier  body  with  a  soft,  slightly 

damp cloth, and then wipe it dry.

–  Remove  and  clean  the  aromatic  oil  container 

(4) and the polyester sponge as they become 
dirty.

Notes:

–  do  not  immerse  the  air  humidifier  body  into 

water or other liquids.

–  do not use abrasive substances and solvents to 

clean «sprayer» and the polyester sponge.

–  as  a  cleaning  agent  for  the  «sprayer»  you  can 

use a descaling agent for kettles, strictly follow-

ing the instruction for this substance.

STORAGE

–  Pour  the  water  out  of  the  tank  and  make 

sure  that  the  process  chamber  (7)  and  the 
“sprayer”  are  dry  before  taking  the  unit  away 
for storage.

–  Do not keep the air humidifier with water inside 

the tank (3) and the process chamber (7).

–  Keep the air humidifier in a dry cool place away 

from children and disabled persons.

TROUBLESHOOTING

Malfunction Possible causes

Troubleshooting

No “mist”

The unit is connected improperly

Check if the power plug is inserted into the 

mains socket.

The unit is off 

Switch the unit on by pressing the button (13).

Water tank is empty or there isn’t 

enough water in the tank. 

Fill the water tank with enough water.

Foreign smell 

appears 

during the 

operation

First use

Disconnect the unit from the mains. 

Remove the water tank (3), open the lid (1) and 

pour the water out of the water tank, then leave 

the water tank in a dry cool place for 12 hours. 

Dirty or stale water

Unplug the unit, remove the water tank (3), 

open the lid (1), pour the water out of the water 

tank and clean the tank (as described in the 

chapter “Cleaning and maintenance”), then fill 

it with clean water.

IM VT-2349.indd   6

7/30/20   11:59 AM

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-2349?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"