Увлажнители VITEK VT-2336 BK - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
7
ENGLISH
Malfunction Possible causes
Troubleshooting
Foreign smell
appears
during the
operation
First use
Disconnect the unit from the mains. Remove the
water tank, unscrew the lid (6) and pour the water
out of the water tank, then leave the water tank in a
dry cool place for 12 hours.
Dirty or stale water
Unplug the unit, remove the water tank, unscrew
the lid (6), pour the water out of the water tank
and clean the tank (as described in the chapter
“Cleaning and care”), then fill it with clean water.
Foreign noise The water tank is installed
improperly.
Make sure that the water tank is installed properly.
Not enough water in the tank
Fill the water tank with enough water.
The unit is placed on an
uneven surface.
Place the unit on a flat steady surface.
DELIVERY SET
Air humidifier – 1 pc.
Remote control – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Supply voltage: 220-240 V ~ 50 Hz
Power consumption: 30 W
Water tank capacity: 5.5 l
Water flow:
≥
300 ml/h
Humidified area: up to 35 m
2
The manufacturer reserves the right to change
the unit specifications without a preliminary noti-
fication
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
IM VT-2336.indd 7
28.12.2016 17:46:12
