Увлажнители VITEK VT-2336 BK - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
ENGLISH
HUMIDIFIER VT-2336 BK
Insufficient room humidity negatively affects
humans’ and pets’ health as well as plants and
furniture. The recommended comfortable room
humidity level is from 40% to 60%. The air humid-
ifier VT-2336 BK allows you to improve the air
quality in the room.
DESCRIPTION
1.
Control panel and display
2.
Water tank
3.
«Mist» release double nozzle
4.
Water tank carrying handle
5.
Water inlet
6.
Water tank lid
7.
Water tank illumination
8.
Aromatic oil container
9.
Process chamber with sprayer
10.
Humidity sensor
11.
Power cord
12.
Water tank clamp handle
13.
Air humidifier body
14.
Remote control
Control panel (1) and remote
control (14) buttons
15.
«Mist» release intensity setting panel/button
16.
ON/OFF button
17.
Water tank lighting/ionization mode on/off
button
18.
Room temperature indication symbols
19.
Timer indication symbols
20.
Ionization mode on symbol
21.
Empty water tank symbol
22.
Room relative humidity symbols
23.
«Mist» release intensity mode symbols
24.
Room relative humidity setting button
25.
Timer setting button
AT TENTION!
For additional protection it is reasonable
to install a residual current device (RCD) with
nominal operation current not exceeding
30 mA. To install RCD, contact a specialist.
SAFETY MEASURES
Before using the electrical unit, read this instruc-
tion manual carefully and keep it for future ref-
erence.
Use the unit for its intended purpose only, as
specified in this manual. Mishandling of the unit
may lead to its breakage and cause harm to the
user or damage to his/her property.
•
Before switching the unit on, make sure that
voltage of the mains corresponds to unit oper-
ating voltage.
•
Place the unit on a flat, moisture-resistant sur-
face. The distance to the walls, other furniture
and interior objects should be at least 30 cm.
•
Do not place the unit on carpet surfaces with
high pile.
•
Do not place the air humidifier in places
exposed to direct sunlight, high temperatures,
near computers or other sensitive electronic
appliances.
•
Do not use the unit outdoors.
•
Use the supplied removable parts only.
•
Do not operate the unit without water; switch
the unit off when the water tank is empty.
•
Do not use soda or dirty water or any perfume
additives.
•
Water temperature should not exceed +40°С.
•
Do not switch the unit on if the water tank is
not installed.
•
Unplug the unit before removing the water
tank.
•
Do not cover the unit.
•
Do not cover the openings on the unit body
and avoid getting of foreign objects inside
them.
•
Do not immerse the unit body, the power plug
or the power cord into water or any other liq-
uids.
•
Do not move or tilt the unit during the opera-
tion and do not remove the water tank.
•
Always unplug the unit and pour out water
from the water tank and the process cham-
ber before cleaning or if you do not use the
air humidifier.
•
Before moving the unit to another place,
unplug it and pour out water from the water
tank and the process chamber. When carrying
the unit, hold it by the body with both hands.
•
Do not touch the power plug with wet hands.
•
Clean the unit regularly.
•
If you are not planning to use the remote con-
trol for a long time, remove the battery from
the battery compartment.
•
Strictly follow the polarity according to the
markings when installing the battery.
•
Replace the batteries in time.
IM VT-2336.indd 3
28.12.2016 17:46:12
