VITEK VT-2335 BK - Инструкция по эксплуатации - Страница 6

6

 ENGLISH

–  Rinse the process chamber (4) and the water 

tank (6) several times. Wipe the process 
chamber (4) with a soft cloth.

– 

Clean the air humidifier body (12) with a soft, 
slightly damp cloth, and then wipe it dry.

– 

Remove  and  clean  the  air  inlet  grid  (1)  as  it 
becomes dirty.

Notes:

– 

Do  not  immerse  the  air  humidifier  body  into 
water or other liquids.

– 

Do not use abrasives or solvents for cleaning 
the «sprayer».

– 

As a cleaning agent for the «sprayer» you can 
use a descaling agent for kettles, strictly fol-
lowing the instruction for this substance.

Mineral filter (10)

The  mineral  filter  purifies  water  of  admixtures, 
heavy metal ions, bacteria etc.
 

Cleaning the mineral filter

– 

It is recommended to wash and clean the min-
eral  filter  (10)  from  time  to  time,  especially  if 
using «hard water».

– 

Remove  the  water  tank  (6),  unscrew  the 
lid (11) and remove it, unscrew the mineral fil-
ter (10), rotating it counterclockwise.

– 

Fill  a  suitable  container  with  water  of  room 
temperature,  add  some  vinegar  (approxi-
mately  a  tablespoon)  and  put  the  mineral  fil-
ter  (10)  into  the  container  for  approximately 
10 minutes.

– 

Take the filter (10) out and wash it under run-
ning water jet.

– 

Install  the  mineral  filter  (10)  on  the  lid  (11) 
rotating it clockwise.

STORAGE

– 

Pour  the  water  out  of  the  tank  and  make  sure 
that  the  process  chamber  and  the  «sprayer» 
are dry before taking the unit away for storage.

– 

Do not keep the unit with water inside the tank 
or the process chamber.

– 

Before  taking  the  mineral  filter  (10)  away  for 
storage, clean it and dry; keep the filter (10) in 
a darkened cool place.

– 

Keep  the  air  humidifier  away  from  children  in 
a dry cool place. 

TROUBLESHOOTING

Malfunction

Possible causes

Troubleshooting

No “mist”

The unit is connected improperly

Check if the power plug is inserted into the 
mains socket.

The unit is off 

Switch the unit on by pressing the 
button (13).

Water tank is empty or there isn’t 
enough water in the tank. 

Fill the water tank with enough water.

Foreign smell 
appears 
during the 
operation

First use

Disconnect the unit from the mains. Remove 
the water tank, unscrew the lid (11) and 
pour the water out of the water tank, then 
leave the water tank in a dry cool place for 
12 hours. 

Dirty or stale water

Unplug the unit, remove the water tank, 
unscrew the lid (11), pour the water out of the 
water tank and clean the tank (as described 
in the chapter “Cleaning and care”),  
then fill it with clean water.

Foreign noise The water tank is installed 

improperly.

Make sure that the water tank is installed 
properly.

Not enough water in the tank

Fill the water tank with enough water.

The unit is placed on an uneven 
surface.

Place the unit on a flat steady surface.

IM VT-2335.indd   6

27.02.2017   17:35:47