VITEK VT-1762 W - Инструкция по эксплуатации - Страница 6

6

 ENGLISH

12. You can set up operation time of the unit. 

Press the (6) “SETUP” button several times 
until the flashing indication “Timer” (32) 
appears on the display (1). Press the (5) 

“+/” 

button to set the required operation time of 
the humidifier from 

1 till12 hours. 

13.  To learn the remaining operation time of the 

humidifier, press the (6) “SETUP” button until 
the flashing indication “Timer” (32) appears 
on the display (1).

10.  After you set the value of the relative humidity 

and operation time of the humidifier, values 
of the real room humidity, preset humidity 
and the remaining operation time of the unit 
will be displayed during 40 seconds in turns. 

11. 

After operation, switch off the unit, by 
pressing the (3) “ON/OFF” button

, the 

digital value of the relative room humidity will 
appear on the display (1), and the water tank 
lighting (9) will be on.

11.  When the water tank becomes empty (15), 

the humidifier will switch off automatically, 
the indication (27) will light up on the display 
(1) and you will hear sound signals.

Remote control (19)

For convenient control of the unit, use the re-
mote control. The functions of the buttons are 
given in the “DESCRIPTION” section.
- 

If there is an isolation insert in the battery 
compartment, remove it, if the battery is 
supplied separately, remove the holder of 
the battery, by preliminary pressing the 
clamp, insert the battery in the holder, strictly 
following the polarity, insert the battery 
holder  into the remote control. 

Cleaning and care

Warning: Always switch off and unplug the unit 
before cleaning.

-   Hard water causes the appearance of scale 

on the “sprayer” (10), on the inner parts of the 
body and on the water tank; it leads to improper 
operation of the unit and appearance of white 
deposit on the interior. Filter-cartridge (17) 
decreases water hardness, but when using 
the humidifier in regions with hard water, we 
recommend using cold boiled or distilled water. 

-   To preserve the humidifier in good operating 

condition it is necessary to clean the “sprayer” 

(10) weekly and change water as often as 
possible, 

as well as to perform cleaning of the 

filter-cartridge

 (17). 

-  

If you are not going to use the unit for a long 
time: - pour out water from the tank (15) and 
the operating chamber of the “sprayer”(10), 
wash the water tank (15), wash and clean the 
operating chamber of the “sprayer”  and the 
“sprayer” (10)  itself, dry the unit and take it 
away for storage.

Weekly care

-   Once a week carefully wash the water tank 

(15) and the operating chamber of the 
“sprayer” (10) with a neutral washing liquid 
solution. After that, carefully rinse them with 
water.

-   Add 5-10 drops of the cleaning agent on the 

“sprayer” (10); wait about 2-5 minutes. Use 
a soft cloth to remove the deposit from the 
surface of the “sprayer” (10).

Note:

-   As a cleaning agent for the “sprayer” (10) 

you can use substances for scale removal in 
kettles.

-   Do not immerse the unit into water or other 

liquids.

Cleaning the filter

-  

Clean the filter (17) after about 1000 l of 
water pass through it, and when using hard 
water or appearance of white deposit on the 
furniture, more often.

-  

Take the handle (12) and remove the water 
tank (15) from the body (8).

-  

Turn over the water tank (15), unscrew the lid 
(18) by turning it anti clockwise and remove 
the filter-cartridge (17), by turning it anti 
clockwise.

-  

Put the filter-cartridge (17) for 10 minutes 
into the bowl with vinegar, take out the 
filter-cartridge (17) and wash it under warm 
tapping water.

-  

Place the filter-cartridge (17) back on the lid 
(18), by turning it clockwise.

Storage

- If you are not going to use the unit for a long 
time, make sure that all its parts are dry, includ-

VT 1762_Instr.indd   6

VT 1762_Instr.indd   6

22.06.2011   17:22:57

22.06.2011   17:22:57