Brayer BR4705 - Инструкция по эксплуатации - Страница 5

8

9

en

en

• 

Notes:

 -

use the water tank (3) handle (2) only for carrying 

the water tank (3);

 -

do not use the handle (2) to carry the air humidifier 

with the water tank (3) installed.

•  Turn over the water tank (3), unscrew the lid (7) with 

the cartridge filter (6) turning it counterclockwise.

•  Fill the water tank (3) with necessary amount of 

water, insert the lid (7) with the cartridge filter (6) into 

the water inlet (5) and thread it rotating clockwise.

• 

Notes:

 - to avoid appearance of white deposits on interior 

objects it is recommended to use boiled and 

settled water, filtered or distilled water;

 -

before the first use it is recommended to unscrew 

the cartridge filter (6) from the lid (7) and put it into 

a suitable container with water for 5-10 minutes.

 -

install the cartridge filter (6) on the lid (7) and 

thread it rotating clockwise.

 -

the cartridge filter softens hard water, removes 

unpleasant smells and prevents generation of 

bacteria. 

•  First place the filled water tank (3) back to its place 

and then install the nozzle (1).

•  Wait till the process chamber (8) is filled with water.

•  Insert the power cord plug (5) into the mains socket, 

you will hear a sound signal.

On/OFF BUTTOn «On/OFF   »

•  Press or touch the button (10) «ON/OFF   » (on the 

remote control). The air humidifier will switch on in the 

automatic room humidifying mode, the symbol «AUTO» 

will light up on the display (7). In the «AUTO» mode the 

unit estimates the optimal room humidity every minute 

and maintains it. 

•  To finish the unit operation press/touch the button (10) 

«On/OFF   » again.

PLASMA MODe «PLASMA   »

•  To switch the plasma mode on touch the button (11) 

«PLASMA 

 » on the control panel (6) or press the 

button (11) «   » in the remote control, the symbol (18) 

« 

 » will light up on the display (7). To switch off the 

plasma mode press or touch the button (11) again, the 

symbol «   » will go out.

•  In the plasma mode the generator produces both 

positive and negative ions, the amount of negative ions 

is 1,5 times more than the amount of positive ions. 

negative ions clean the air in the room and positive 

ions kill various bacteria.

WATeR HeATInG MODe «HeATInG   »

• 

To switch the water heating mode on/off touch/press 

the button (12) «HEATING   », the symbol (20) « 

 » will light up on the display (7). To switch the 

water heating mode off touch/press the button (12) 

«HEATING 

 » again, the symbol «   » will go out.

• 

Note:

- be careful when using the air humidifier in the 

water heating mode, the outgoing mist is hot. 

SeTTInG THe ROOM ReLATIve HUMIDITY 

Relative humidity is the ratio of the mass content of 

water vapor in the air to the maximum possible mass at 

the given temperature; relative humidity is measured in 

percent and is indicated, for example, as «45%».

Atmosphere air always contains water vapour, 

percentage of which depends on meteorological 

conditions; the higher the temperature, the more water 

vapour is contained in the air. When cold air is heated 

up to comfort temperature in winter, relative percentage 

of water vapour decreases, this is what relative humidity 

is.
To maintain comfortable room conditions, water or water 

vapor must be artificially added to the ambient air — this 

is what the air humidifier is necessary for.
Comfortable relative humidity for humans is «45-65%»; 

«40-55%» for preventive and medicinal purposes; 

for furniture, musical instruments and libraries it is 

recommended to maintain relative air humidity of «40-

60%».
•  Consequently pressing/touching the button (16) 

«HUMIDITY 

» you can set the desired humidity 

level within the range from 30% to 75% with a step 

5%. After setting the relative humidity it will be 

shown every 5 seconds on the display (7) with digital 

symbols (22) «%RH». Touch/press the button (16) to 

view the preset humidity. 

• 

When the desired humidity level is reached, the air 

humidifier will be switched off, when the relative 

humidity level decreases, the air humidifier will switch 

on.

• 

To switch the selected humidity maintenance mode 

off press/touch the button (16) «HUMIDITY 

» until 

the flashing symbols (23) «Co» appear on the display 

(7).

• 

Note: 

— touch the symbol «

» for a 

long time to switch the humidity maintaining mode off 

and switch to the automatic humidifying mode, the 

symbol «AUTO» will light up on the display (7).

MIST ReLeASe InTenSITY COnTROL 

•  Consequently pressing the symbol (15) «

» on the control panel (6) or 

pressing the button (15) «

» on the remote control 

you can select 7 mist release intensity modes. The 

modes will be shown with symbols (23) «MIST 

VOLUME» on the display (7). 5 seconds after setting 

the mist release intensity the current humidity level 

and temperature will appear on the display (7).

• 

Note: 

— despite the operating mode, if the room 

humidity increases to 90%, the air humidifier will 

switch off. If the room humidity level goes below 

85%, the air humidifier will switch on again. 

ILLUMInATIOn SWITCHInG On/OFF «LIGHT  »

• 

you can switch the night mode on/off only with the 

button (13) on the control panel (6).