Beurer LB 37 - Инструкция по эксплуатации - Страница 18

18

Problem

Cause

Solution

The mist has a  strange 

smell

The device is new.

Remove the water tank, turn the screwed plug 

and remove it. 

Air the open, emply water tank in a cool, dry place 

for twelve hours.

Stale or dirty water.

Empty the base unit and the water tank and clean 

them thoroughly.

Fill the water tank with fresh water.

Strange noise

The water tank is not positioned 

correctly on the base unit.

Lift up the water tank and position it correctly on 

the base unit.

The tank should sit tightly on the base unit.

There is too little water in the water 

tank.

Fill the water tank.

The device is not level and unsta-

ble.

Place the device on a firm, level surface.

Mist escapes underneath 

the water tank

The water tank is not positioned 

correctly on the base unit.

Lift up the water tank.

Check whether the join between the base unit 

and water tank is clean.

Clean if required.

Position the water tank correctly on the base unit.

The tank should sit tightly on the base unit. 

The LED lights up red 

although the tank is full

The device evaluates the water 

level incorrectly due to a fault.

Restart the device.

10. Technical data

Dimensions (LxWxH)

approx. 21 cm x 11 cm x 25,5 cm

Cable length

approx. 1.5 m

Mains voltage/frequency

100 – 240 V AC / 50/60 Hz

Nominal power

max. 20 W

Room size

up to 20 m² 

Capacity

approx. 2 litres

Evaporation output

200 ml/hour

Signs and symbols

The unit is double-protected and thus corresponds to protection 

class 2.

Volume

approx. 35dB