Timberk THU UL 22 E - Инструкция по эксплуатации - Страница 6

www.timberk.com • electric humidifier

6

Timer to turn off the device

To set the timer time to turn off the device, press the «TIMER» button several 

times, and the set timer time before the device is turned off will be reflected in 

the dis- play from 1 to 7 hours. Within 3 seconds after the setting, the set value 

will be remembered. The device will switch off after the set time interval has 

elapsed. Turning off the instrument or setting the timer value [0] will cancel the 

timer to turn off the device.

The humidifier is equipped with color illumination

When you turn on the backlight, the different colors will change in turn. In 

order to include Press the LED light button to turn on the backlight. To turn 

off the color light, press the LED light button again.

Automatic shut-off in the absence of water

If the water level in the tank drops below the minimum permissible level, the 

ultrasonic membrane of the device will automatically shut off with 3 buzzing 

sound. To continue the operation of the device it is necessary to fill the 

reservoir with water according to item 6 «Filling the reservoir with water», 

then connect the device to the electrical network.

Remote control 

With the remote control it is possible to control all functions of the device 

in an effective range of 5 meters. The description of the buttons is shown 

in figure 3. 

Aromatization

The device is equipped with an aroma capsule. When you add aromatic oil 

to it, air is aromatized. Aromatic oil is not included in the scope of supply.

Switching off the device

To turn off the device, press the «ON / OFF» button for unplug the appliance 

from the mains.

7. FILLING THE WATER TANK

1. Remove the water tank from the appliance housing.
2. Turn over the reservoir and unscrew the tank cap with the valve counter-

clockwise.
3. Fill the tank with water.
4. Tighten the tank cap with the valve clockwise. Ensure that the lid of the tank 

is tightly seated. Incomplete performance of the above measures leads to air 

ingress into the water reservoir and, as a consequence, to a malfunction.
5. Install the water tank in the body of the appliance, then install the sprayer.
6. The water tank has a recess, and the inside of the body of the device has 

protrusions for the correct installation of the reservoir.

Fig.4