Tefal HD5235F0 - Инструкция по эксплуатации - Страница 10

10

This appliance has 

3 operating modes (AUTO COMFORT, CONTROL , CONTINUOUS)

as well as various

additional functions.

”ON/STAND-BY”: 

switch on / standby (stop); button A.

Press  button  (A)  to  start  the  appliance  or  to  put  it  on  standby.  The  digital  screen  lights  up  and  the
device starts directly in AUTO mode.

SMART OPERATION MODES:

Selection of operating modes using button B. Select one of the three modes by repeatedly pressing
the button B.

1 - AUTO COMFORT MODE:

The  appliance  will  automatically  adapt  the  humidity  level  according  to  the  room  temperature  for
optimal comfort at home.
In  order  to  reach  the  optimal  comfort  in  the  room  you  are  in,  this  setting  takes  in  account  the  room
temperature and calculates the optimal humidity level.
When the humidity in the room is lower than the program, the appliance operates at maximum speed.
When  the  humidity  in  the  room    is  reached,  the  appliance  stops  working  and  re-starts  at  maximum
speed as soon as the humidity in the room is lower than the program.
The humidity and the temperature in the room are measured every 60 seconds.

You can select the warm mist function with Auto comfort mode.

2 - CONTROL MODE:

• Humidity level: Button B for adjusting the required (target) humidity level; 

Select the required humidity level by pressing button B several times.
The humidity level displayed is the required level that you have set (between 45% and 90% RH).
You can select the warm mist function with Control mode.

• Mist volume: Button C

Select the required mist volume by pressing button C several times. There are three speeds available.
You can adjust the mist volume in order to reach faster the required level of humidity.
PLEASE NOTE: This setting cannot be used for 

AUTO COMFORT

mode.

3 - CONTINUOUS MODE:

Press the Button B, until the continuous mode, “Co”  appears on the digital screen.  
The appliance operates until reaching 90% RH (safety limit) or until the reservoir is empty. The mist is
permanently emitted and you can adjust the mist volume.
The appliance will stop working automatically when the humidity level of the room is over 90% RH and
it will re-start when the humidity level of the room measured is 80% RH.

WARNING:  In  the  continuous  operating  mode,  the  humidity  in  the  room  can  reach  very  high  levels
that are not beneficial to health and can damage certain objects. The recommended optimal humidity
level is between 50 and 60% RH.

• Mist volume: Button C

Select the required mist volume by pressing button C several times. There are three speeds available.

ADDITIONAL FUNCTIONS:

• TIMER: Button D for programming the automatic stop of the appliance.

Select  the  number  of  hours  that  you  want  the  appliance  to  run  for  (from  1  to  12 hours)  before  the
appliance automatically stops, by pressing button D several times. The display will show the remaining
time. Anytime, you can change  the timer, increasing the time by pressing the button, until 12hours.

• WARM MIST function Button E: Heated mist for anti-bacterial and turbo effects:

Press button E to start or stop the “Warm Mist” function. On the screen, the red pictogram appears or
disappears. After 10 minutes of use, the mist becomes warm.

HOW THE APPLIANCE OPERATES

Temperature

≤

19 °C  20-21°C

22-23°C

24-25°C

26-27°C

28-29°C

30-32°C

33-36°C

≥

37°C

Humidity
target % RH

65 % 

60 %

55 %

50 %

45 %

40 %

35 %

30 %

25 %

EN

TE_HUMIDIFICATEUR_AQUA-PERFECT_RU_1800144324.qxp_mise en page  08/06/2017  15:55  Page10