Утюги VITEK VT-8303 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENGLISH
5
•
The iron heats up faster than it cools
down. For this reason, it is recommended
to begin ironing at low temperature (for
instance, synthetic fabrics).
•
After that, start ironing at higher tempera-
ture (silk/wool). Cotton and linen items
should be ironed last.
•
If an item is made of mixed fabrics, the
iron should be set to the lowest tempera-
ture (for instance, if an item is made from
polyester and cotton, it should be ironed
at the temperature used for polyester
ironing “
•
”).
•
If you cannot define the fabric structure,
find a spot that is inconspicuous when the
item is being worn and select the ironing
temperature experimentally (always start
with the lowest temperature and raise it
gradually until you get the desired result).
•
Corduroy and other fabrics that become
glossy quickly should be ironed strictly in
one direction (in the direction of the pile)
with slight pressure.
•
To avoid appearance of glossy spots on
synthetic and silk fabrics, iron them back-
side.
SETTING THE IRONING TEMPERATURE
•
Lift the handle (1) and it will be fixed.
Press the PUSH button (7) before moving
the handle (1) down.
•
Before plugging the iron in, set the AC
voltage selector (8) according to the
mains voltage. After using the iron at the
mains voltage of 110 V always set the AC
voltage selector (8) to the 220 V position,
this will prevent the iron from damage if
it is connected to the mains with higher
voltage (fig.1).
•
Unwind the power cord and insert the
plug into the socket.
•
Turn the temperature control knob (11)
to set the required ironing temperature:
«
•
», «
••
», «
•••
» or «MAX» (depending
on the type of fabric), the indicator (10)
will light up.
•
Place the iron vertically.
•
When the iron soleplate temperature (9)
reaches the desired temperature value,
the indicator (10) will go out, you can
start ironing.
Note:
if the unit is switched on for the first
time, the iron heating element burns, so a
small amount of smoke or foreign smell may
be expected. This is normal.
DRY IRONING
•
Set the continuous steam supply on/
off handle (12) to the position « »
(steam supply is off).
•
Turn the temperature control knob (11)
to set the required ironing temperature.
•
Place the iron vertically.
•
When the iron soleplate temperature (9)
reaches the desired temperature value,
the indicator (10) will go out, you can
start ironing.
•
After use, unplug the iron and let it cool
down completely.
•
Press the «PUSH» button (7) and move
the handle (1) down.
STEAM IRONING
For steam ironing, set the temperature control
knob (11) to the “MAX” position.
•
Fill the tank with water as described in the
relevant section.
•
Insert the power plug into the mains sock-
et.
•
Set the temperature control knob (11) to
the “MAX” position, the pilot lamp (10)
will light up.
•
Place the iron vertically.
•
When the temperature of the iron sole-
plate (9) reaches the set temperature
value, the pilot lamp (10) will go out, you
can start ironing.
•
Turn on continuous steam supply by set-
ting the handle (12) to the leftmost posi-
tion (steam supply is on) and the steam
will start going out from the iron soleplate
(9) openings.
•
After use, set the temperature control
knob (11) to the “
•
” position, and turn off
continuous steam supply by setting the
handle (12) to the « » position (steam
supply is off).
•
Pull the plug out of the socket and let the
iron cool down completely.
•
Open the lid (3) and pour the water out
from the water tank.
•
Press the «PUSH» button (7) and move
the handle (1) down.
IM VT-8303_A6_105x148.indd 5
24.05.2017 10:11:53
