Taurus Geyser Eco 3000 - Инструкция по эксплуатации - Страница 8

SELF-CLEANING FUNCTION:   

- It is important to self-clean the appliance at least 

once a month to remove calcium and any other 

built-up minerals inside the iron.

- Fill the water tank to its maximum level, as indi

-

cated in the “filling with water” section. 

- Place the iron in an upright position, plug in to 

the mains and select maximum temperature.

- Leave the appliance to heat up until the pilot 

light indicates that it has reached its consigned 

temperature.

- Unplug the appliance and place it in the sink.
- Press and hold the self-clean button.
- Let the water flow out through the steam vents 

in the base, while lightly shaking the appliance.

- Release the button after a minute or when the 

tank becomes empty.

- Leave the iron in the upright position until it has 

cooled.

ANTISCALE FILTER REPLACEMENT (FIG. X) 

GEYSER ECO 3000

(ATTENTION) Make sure there is no water in the 

tank.
1 Rest the iron on its heel, rotate the wheel 

counter-clockwise until it reaches its limit and 

the arrow is aligned with the open padlock sign 

(approx. 180º) and pull it backward.
2 To reinsert the filter, align the arrow with the 

open padlock sign and turn clockwise, as shown 

in the drawing, at the same time pressing the 

piece inwards until it is aligned with the closed 

padlock sign.
When the filter is in position, make sure it DOES 

NOT PROTRUDE from the rear end of the 

appliance. Otherwise, this means it has not been 

correctly inserted and water will come out of the 

tank.

* HOW TO DEAL WITH LIME SCALE INCRUS-

TATIONS: 

- For the appliance to work correctly it should be 

kept free of lime scale or magnesium incrusta

-

tions caused by the use of hard water. 

- To prevent this kind of problem, we recommend 

the use of water with low lime or magnesium 

mineralisation.

- However, if it is not possible to use the kind of 

water recommended above, you should periodi

-

cally replace the iron’s anti-scale cartridge: 

•  Every 12 weeks if the water is “very hard”.
•  Every 18 weeks if the water is “hard”.
- To do so, we recommend the use of a specific 

product for this type of appliance, on sale in 

specialised shops and authorised technical 

services.

- A specific anti-scale cartridge should be used for 

this type of appliance.

- Homemade solutions are not recommended for 

de-scaling this appliance, such as the use of 

vinegar.