Taurus Geyser Eco 3000 - Инструкция по эксплуатации - Страница 7

perature position.

- Do not use temperatures higher than those 

indicated on the garments to be ironed.

  ● Temperature for synthetic fibres (Polyester, 

Nylon…).

  ●● Temperature for silk, wool.
  ●●● Temperature for cotton. 
  Max Temperature for linen.
- If garment has various kinds of fibres, select the 

temperature for the fibre that requires the lowest 

temperature. (For example, select the tempera

-

ture for polyester for a fabric made out of 60% 

polyester and 40% cotton).

- Wait until the pilot light (F) has gone out, indica

-

ting that the appliance has reached an adequate 

temperature.

- During use the pilot light (F) will automatically 

flash on and off, indicating that the heating 

elements are operating in order to maintain the 

desired temperature.

DRY IRONING:

- The appliance has a steam flow regulator 

which, when set to 1, allows dry ironing (without 

steam).  

STEAM IRONING:

- It is possible to iron with steam whenever the 

tank has water and the adequate temperature 

is selected.

STEAM FLOW CONTROL:

- The appliance has a (C) control knob for adjus

-

ting the steam flow.

SPRAY:

- The spray can be used in both steam and dry 

ironing.

- Press the spray button ( A ) to use this opera

-

tion. 

- The spray button has to be pressed repeatedly 

to release the first spray.

STEAM BLAST:

- This function provides extra steam for removing 

creases.

- Press the steam blast button ( B ). Wait a few 

seconds until the steam penetrates the fibres of 

the garment before pushing the button again. 

For optimum steam quality, do not apply more 

than three successive blasts.

- The spray button has to be pressed repeatedly 

to release the first spray.

VERTICAL IRONING:

- It is possible to iron hanging curtains, items 

of clothing on their own hanger, etc. To do so, 

follow these instructions:

- Select the iron’s maximum temperature by tur

-

ning the iron’s temperature regulator clockwise. 

(Fig 2)

- Iron from top to bottom while pressing the steam 

control ( B ). Important: for cotton and linen, it is 

recommended to put the base of the iron in con

-

tact with the material. For other more delicate 

fabrics, it is recommended to keep the base of 

the iron a few centimetres away.

AUTO-OFF FUNCTION (AUTO-OFF): *

- For the purpose of saving energy, the appliance 

switches to auto-off mode (auto-off) if it is not 

moved for a particular period of time. When this 

happens, a beep will sound and the auto-off 

indicator light (G) will flash, indicating that this 

function is activated.

- Auto-off in horizontal position: after about 30 

seconds without moving the appliance.

- Auto-off in upright position: after about 8 minutes 

without moving the appliance. 

- To return to normal operation, simply move the 

appliance again. 

*Only available on ECO 3000 and Geyser ECO 

2800 model

ONCE YOU HAVE FINISHED USING THE 

APPLIANCE:

- Select the minimum position (MIN) using the 

thermostat control.

- Unplug the appliance from the mains.
- Remove the water from the water tank.
- Clean the appliance.

CLEANING

- Unplug the appliance from the mains and let it 

cool down before performing any cleaning task. 

- Clean the appliance using a damp cloth with a 

few drops of detergent and then dry it.

- Do not use solvents, or products with an acid or 

base pH such as bleach, or abrasive products, 

for cleaning the appliance.

- Do not immerse the appliance in water or any 

other liquid, or place it under a running tap.