Sencor SSI3520RS - Инструкция по эксплуатации - Страница 5

- 5 -

02/2021

 Copyright © 2021, Fast ČR, a.s.

EN

Steam iron

User's manual

 ■

Prior to using this appliance, please read the user's manual thoroughly, even in cases, 

when one has already familiarised themselves with previous use of similar types of 

appliances. Only use the appliance in the manner described in this user’s  manual. 

Keep this user's manual in a safe place where it can be easily retrieved for future use. 

In the event that you hand this appliance over to somebody else, make sure to also 

include this user's manual.

 ■

Carefully unpack the appliance and take care not to throw away any part of 

the packaging before you find all its parts. We recommend saving the original 

cardboard box, packaging material, purchase receipt and responsibility statement 

of the vendor or warranty card for at least the duration of the legal liability 

for unsatisfactory performance or quality. In the event of transportation, we 

recommend that you pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 

Handle

A2 

Steam impulse button

A3 

Water spraying button

A4 

Steam release regulator 

– Steam release off

– Steam release on full

A5 

Water tank cap

A6 

Water spraying nozzle

A7 

Ceramic ironing soleplate

A8 

Maximum water level mark

A9 

Heating indicator 

A10 

Swivel power cord end

Limits twisting and tangling of the 

power cord.

A11 

Stand

A12 

Temperature control knob

A13 

Transparent easy-to-fill water tank 

A14 

Self-Clean button for removing 

limescale deposits

A15 

Regulator setting mark

A16 

Water tank filling container (not 

shown)

BEFORE FIRST USE

 ■

Before first use, remove all packaging materials including promotion stickers and 

labels from the iron. Wipe the soleplate with a  lightly dampened cloth before first 

use and then wipe dry.

 ■

Using a dry or lightly dampened cloth, also clean the outer parts of the iron and then 

wipe it dry. Never submerge the iron in water or any other liquid!

OPERATION

FILLING THE WATER TANK

 ■

Before filling the water tank, the iron must be disconnected from the power socket 
and the steam release regulator must be set to position 

 (steam output off ).

 ■

The iron is intended to be filled with tap water. Limescale deposits may quickly form, 

if you live in an area with hard or very hard water. To extend the lifetime of the iron, it 

is recommended to mix the tap water with distilled water. The ratio of distilled water 

to tap water is as follows: 

  – 1:1 for medium hard water

  – 2:1 for hard water

  – 3:1 for very hard water

Note

:

Your local water utility will provide information about the water hardness 

in your area.

Attention:

Never add water softeners, vinegar, starch, descaling agents, 

perfumes or other additives to the water.

 ■

Fill the included container with water. Flip open the cap of the filling opening and 

slightly tilt the iron. Slowly pour the water from the container through the filling 

opening into the water tank. Make sure that the water level does not rise above the 

maximum water level mark on the water tank. To correctly assess the water level, it 

is necessary to stand the iron in the upright position.

 ■

After filling the water tank, close the filling opening lid and put the iron in the 

upright position. In the event that you spilled any water while filling, thoroughly 

dry the iron.

SETTING TEMPERATURE ACCORDING TO TEXTILE

 ■

When setting the temperature, pay attention to the material composition of 

the textile. It is recommended to sort the laundry according to the international 

symbols shown on the textile, according to the type of textile or according to the 

recommendations of the manufacturer on the label. The number of dots inside the 

international symbol corresponds to the number of dots on the temperature control 

knob.

INTERNATIONAL 

SYMBOL

FABRIC TYPE

SUITABLE FOR

CONTINUOUS 

STEAMING

STEAM 

BOOST

SPRAYING

Synthetic fabric 

(acrylic, acetate, 

polyester, 

viscose, etc.)

No

No

Yes

Cotton with 

addition of 

other types 

of fibres, silk, 

wool, wool with 

addition of 

other types of 

fibres, etc.

No

No

Yes

Corduroy, 

cotton, denim 

and linen

Yes

Yes

No

Fabric, that should not be ironed

TURNING ON

 ■

Connect the power cord to a  power socket. Turn the temperature control knob to 

the required temperature setting. Indicator 

A9

 will be lit, which means that the 

iron is heating up. When the iron's thermostat reaches the correct temperature, the 

heating indicator will turn off. The iron is now ready for use.

Note:

The heating indicator will spontaneously turn on and off during use. This 

is completely normal.

In the event that the temperature control knob was not set to the MIN 

position the after previous use of the iron, and was left at one of the 

temperatures, the heating indicator will be lit immediately when the 

power cord is plugged into the power socket.

IRONING WITHOUT STEAMING

 ■

This function enables the use of the iron with or without water in the water tank, 
however, the steam release regulator must be set to position 

 (stream output off )

Note:

When used for the first time, the iron may emit smoke, which is non-toxic. 

This is normal. After a short time, the iron will stop emitting smoke.

IRONING WITH STEAM

Attention:

In order to iron with steam, the water tank must be filled with 

water.

CONTINUOUS STEAMING FUNCTION

 ■

If you wish to iron with steam, slide the steam release regulator from position 

(steam release off ) towards position   (steam release on). Select the position based 

on the required steam intensity. The more the steam regulator is moved to the right, 

the stronger the steam intensity. 

 ■

Wait until the heating indicator turns off.

 ■

The steam release regulator can be moved at any time while ironing.

 ■

For all standard ironing, it is recommended to use the middle settings of the steam 

release regulator. Only when ironing linen fabrics, strong silk or similar fabrics is it 

recommended to set the steam release regulator to maximum.

Note:

The iron continuously emits steam only if you hold it in a  horizontal 

position. You can stop the release of steam by standing the iron upright.

 ■

Setting the steam release regulator to position 

 (steam output off ), deactivates 

the steam function. 

STEAM IMPULSE FUNCTION

 ■

Use this function when ironing with continuous steam is insufficient. Press the 

steam impulse button to generate a strong flow of steam, which can straighten out 

even very crumpled up textiles.

 ■

Wait at least 3 seconds before pressing the button again. If the heating indicator 

starts flashing, wait until it turns off and only then press the button. 

 ■

 The steam impulse function can also be used when ironing hanging textiles (e.g. 

curtains, garments hanging on coat hangers, etc.). Use one hand to gently tension 

the fabric and vertically move the iron from bottom up. Press the steam impulse 

button to achieve vertical bursts of steam. Do not hold the steam impulse button 

continuously and do not consecutively use it more than 10 times.