Утюги Saturn ST-CC7127 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
GB
IRON
Dear Buyer!
We congratulate you on having
bought the device under trade name
“Saturn”. We are sure that our de-
vices will become essential and reli-
able assistance in your housekeep-
ing
.
Avoid extreme temperature chang-
es. Rapid temperature change (e.g.
when the unit is moved from freez-
ing temperature to a warm room)
may cause condensation inside the
unit and a malfunction when it is
switched on. In this case, leave the
unit at room temperature for at
least 1.5 hours before switching it
on.
If the unit has been in transit, leave
it indoors for at least 1.5 hours be-
fore starting operation.
DESCRIPTION
1. Temperature knob
2. Burst of steam button
3. Spray button
4. Spray nozzle
5. Water inlet cover
6. Steam control knob
7. Soleplate
8. Self clean button
9. Housing
10. Water tank
11. Cord protector
IMPORTANT SAFEGUARDS
1.
Please read all instructions carefully
before using the appliance for the first
time.
2.
Before connecting the appliance,
check if the voltage indicated on the
rating plate corresponds with the mains
voltage in your home.
3.
Do not use appliance for other than
intended use.
4.
The iron should always be switched
off before connecting or disconnecting
from the power supply. Do not pull on
the cord to disconnect the plug from the
wall socket.
5.
Do not use the iron when it is dam-
aged in any way. Do not operate the
iron with a damaged cord or plug. Do
not replace the power cord or any other
parts by yourself-contact Customer
Support for Assistance.
6.
The iron must not be left unattended
while it is connected to the supply
mains.
7.
The iron must be removed from the
socket outlet before the water reservoir
is filled with water (for steam irons in-
corporating means for spraying water).
8.
The iron must be used and rested on
stable surface.
