Утюги Saturn ST-CC0226 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
13. Do not pull out steam pipe during
use.
14. Always unplug the unit before filling
water and cleaning.
15. For indoor use only.
16. There’s no heating device in the
steam spray board. So do not take
the brush down during using.
17. This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
18. Children should be supervised to
ensure that they do not play with
appliance.
Description of the appliance
1.
Fixed sets of airway.
2.
Airway fixator.
3.
Cover.
4.
Cord storage compartment
5.
Aluminum heating element.
6.
Base.
7.
Telescopic rod fixed sets.
8.
Button of automatic cord rewinder.
9.
ON/OFF button.
10. Water tank.
11. Tank handle.
12. Lamp.
13. Water tank cap.
14. Direction of the wheel.
15. Inlet pipe.
16. Wheels.
17. Outlet port screw nut.
18. Hanger.
19. Clip.
20. Bar.
21. Fabric brush.
22. Steam nozzle.
23. Extension lock.
24. Telescopic pole.
UNIQUE FEATURES
·
Automatic water supply
·
Overheat protection
·
Cord storage
·
Automatic cord reeling on
·
Anti-slip feet
·
Two 3-tier telescopic tubes
·
Loop for brush
·
Loop for fixing the hose
Installation and Operation
1.Open the lock button
，
pull up the
telescopic rod
，
adjust to the appropriate
23
24
5
location, then press the button again.
2.The telescopic rod is inserted into the
fixed nut within the telescopic rod
，
The
direction of the arrow shows how to
tighten the screws of the telescopic rod
to secure it.
3.Expand the hanger arms to a straight-
line position, put the support bar card
into the slot, and place it in the top of
the telescopic rod and hangers.
4.Put fixed tube of steam hose into fixed
stopper of steam hose, and then fix it.
5.Pull the plug, and then pull the power
cord in the direction shown. Pull to the
length you want.
6.Place the hose head on hanger.
7.Twist off the water tank cap, then put
water into the water tank.
8. Screw the cap, and then put the
water tank into the unit.
9.Rotating the rotary switch, turn on the
power. Indicator can use rotating stall
power to size clothing thickness.
19. Service life - 2 years.
