Russell Hobbs 28370-56 - Инструкция по эксплуатации - Страница 5

5

BEFORE USING FOR THE FIRST TIME

• 

Remove labels, stickers and packaging from the appliance.

• 

Read all instructions and warnings.

IMPORTANT INFORMATION

• 

For best performance, we recommend using distilled, purified or filtered water in your steamer. Tap 

water contains minerals that can build up inside your steamer over time and reduce its efficiency or 

even cause damage.

• 

Never use perfumes, oils or other additives.

• 

Always check the garment’s care label before steaming, and always test fabrics for colourfastness in 

an inconspicuous area. Steamers are not recommended for use on leather, suede, vinyl, plastic, or 

other materials that are sensitive to steam.

• 

During use the steamer and accessories will become HOT. Never try to fit or remove attachments 

while still hot.

• 

After preheating, prime the water pump by holding the steam trigger until steam forms.

• 

It is normal to feel or hear the water pump inside the device. It may become louder when the water 

level in the tank is low. Check and refill the tank when required.

• 

Small amounts of dripping might occur during use. If excessive, your steamer needs time to get back 

up to full temperature. Just allow the steamer a minute to reheat.

• 

Wearing clothes immediately after ironing or steaming can actually create wrinkles. Always allow the 

clothing to cool for about 5 minutes before wearing.

ATTACHMENTS

Your steamer has three attachments. 

Fabric attachment

Opens up the fibres in fabrics so the steam can better 

penetrate the material; good for thicker materials like 

coats and can also help to remove pilling.

Delicate fabric attachment

Reduces the possibility of damage to fabrics such as 

silk and lace.

Tip: For items with printing/embellishment, turn the 

garment inside out to avoid damage to sensitive areas.

Upholstery attachment

Deodorise, refresh and clean larger materials such as 

bedding, mattresses, curtains, soft toys, sofas and 

much more.

Always test for colourfastness and heat sensitivity on 

an inconspicuous area.

Fitting/Removing (Fig. A)

1. 

Make sure that the steamer and attachment are cool.

2. 

Hook the top of the attachment over the top edge of the steamer.

3.  Click the bottom edge into place.

4.  Remove attachments by lifting them away from your steamer starting at the heel. When removing 

the attachment, watch out for condensation that may have built up during use.

GB

DE

FR

NL

IT

ES

PT

DK

SE

NO

FI

RU

CZ

SK

PL

HR

SI

GR

HU

TR

RO

BG

UA

AE