Утюги Kraft KF-CI2420A - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
17
УТЮГ
IRON
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
DRY IRONING
• The steam iron can be used for ironing without steaming. Dry ironed products are
recommended to be produced with a completely empty water container.
• Set the thermostat wheel to the minimum position.
• Select the most suitable ironing mode by turning the thermostat wheel.
ATTENTION! If the steam iron has been used for a long time, it is very hot and
the tank has run out of water, do not fill it with water until the iron will not cool
down.
STEAM SHOCK AND VERTICAL STEAMING
• Press the intense steam button to create a powerful steamshock that can penetrate
deeply into the fabric and smooth out the most difficult and toughest folds. Wait a
few seconds before clicking again. Also, using the intensive steam supply button, at
intervals, you can smooth curtains, curtains and other hanging fabrics or clothes.
ATTENTION! Intensive steam supply is possible only at the maximum
temperature mode. When the temperature mode indicator is turned on, the use
of intensive steam supply is impossible. Subsequent use of the mode intensive
steam supply is possible when the temperature indicator is turned off.
AUTO-SHUT OFF
The iron will power off if left motionless for 30 seconds horizontally and 8 minutes for
vertical position.
CLEANING AND STORAGE
• Before cleaning the steam iron, disconnect the appliance from the mains and allow it
to cool completely.
• Clean the device body with a dry, soft cloth without using additional cleaning agents.
• Do not use abrasive cleaners and organic solvents.
• Never immerse the device in water.
SELF-CLEANING
To clean the inner surface of the sole from foreign inclusions, it is recommended to
use this mode every 10-15 days.
• Fill the tank to the maximum level specified and set the steam regulator to “0”.
• Set the rotary thermostat knob to the maximum temperature and wait for the indicator
to turn off.
• Remove the plug from the outlet and hold the iron horizontally over the sink.
• Hold the self-cleaning button until the water completely evaporates, steam escapes
and foreign inclusions.
• After the sole of the iron has completely cooled down, clean it with a damp cloth
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
