Electrolux E7SI1-6LG - Инструкция по эксплуатации - Страница 7

7

www.electrolux.com

DK
EE
ES
FI

FR

HR
HU
IT
LT
LV
NO
PL
RO
RU
SE
SI
SK
TR

DE

AR

GB

CZ

UA

10 

The iron is equipped with 3-way auto-off function. 

If the iron is left unattended on soleplate or the side, it au-

tomatically turns off after 30 seconds. If left unattended on the heel it automatically turns off after 8 minutes. To 

turn it on again, move the iron. A short beep can be heard before the iron is switched off by itself. To reactivate 

the iron, move it shortly and it is back to working mode.

11 

To switch-off the steam iron

, turn the temperature selector to position 0, a short beep can be heard and all 

lights will turn off. Disconnect the mains plug. Never pull the supply cord. Instead, grasp the plug and pull.  

Empty the water tank and let the iron cool completely before storage.

12 

Always store the iron on its heel

 with the cord twisted loosley around the cable wrap facility. To clean exterior 

surfaces, use damp soft cloth and wipe dry. Do not use any chemical solvents, as they may damage the surface.

CLEANING (DO NOT USE ANY DETERGENT)

13 

Flush Clean (K).

 Fill the tank with water to max level (M) and select “Linen” programme. When headlight flashes, 

unplug the iron. Hold the iron over a sink, press the Flush Clean button (K). Use a full tank of water. Release button to 

stop Flush Clean function. Repeat the procedure if necessary. 

NOTE: DO NOT USE ANY DESCALING FLUID, VINEGAR OR CITRUS ACID!

14 

Soft Water Activator (L)

 is recommended right after Flush Clean. Open water filling cover (P) and pull the Soft 

Water Activator (L) out for disposal. Replace with new Water Softener System Electrolux EDC03/900923064. 

Both Flush Clean & Water Softener System in combination ensure a clean, soft steam for best ironing results and 

longer lifetime of your steam iron.

15 

Cleaning the soleplate (O). 

To remove burnt residues, iron over a damp cloth while the iron is still hot.  

To keep the soleplate smooth, avoid contact with metal objects. Never use scouring pads or harsh cleaners as 

they may damage the surface.

HOT SOLEPLATE INDICATOR (A)

16 

Your appliance is equipped with hot soleplate indicator ThermoSafe™ which detects when the soleplate is hot by 

changing its colour from black to red.  

Note!

 During heat-up time, the soleplate might be hot even though the sticker didn’t turn red. Once the temper-

ature of the soleplate is < 40°C, the colour changes back to black showing the iron is ready to be stored away.

Enjoy your new Electrolux product!

SAFETY ADVICE

Read the following instruction carefully before using machine for the first time.

•  This appliance can be used by children aged from 8 years and above and persons 

with reduced physical, sensory or mental capabilities or lack of experience and 

knowledge if they have been given supervision or instruction concerning use of 

the appliance in a safe way and understand the hazards involved.

•  Children shall not play with the appliance.

•  Cleaning and user maintenance shall not be made by children without 

supervision.

•  Keep the iron and its cord out of reach of children less than 8 years of age when it 

is energized or cooling down.

•  The surfaces are liable to get hot during use  .

•  This product is appropriate for use with tap water. It is recommended to use 

Electrolux AquaSense filtered water, taking out impurities like limescale. If the