Electrolux E7SI1-6LG - Инструкция по эксплуатации - Страница 10

10

www.electrolux.com

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

Soleplate is not heating even 

though iron is turned on.

Connection problem

Check main power supply cable, plug and 

outlet.

Temperature control is in “Outdoor” 

position.

Select higher programme like “    Cotton”.

Iron does not produce steam.

Not enough water in tank.

Fill water tank (see “Getting started”, no 2).

Selected temperature is lower than 

that specified to use with steam.

Increase temperature to at least 

“

Cotton

”.

Steam jet and vertical steam 

jet function does not work.

Steam jet function was used very 

frequently within a short period.

Put iron on horizontal position and wait 

before using steam jet function.

Iron is not hot enough.

Adjust the proper temperature to steam 

ironing (up to 

“

   Cotton

”

). Put iron in 

vertical position and wait until temperature 

indicator light turns off.

Water leaks from the soleplate 

during ironing.

The iron is not hot enough.

Select the Cotton setting (

“

   Cotton

” 

to 

maximum) suitable for steam ironing. 

Put the iron on its heel and wait until the 

headlight is on before you start ironing.

Flakes and impurities come 

out of the soleplate during 

ironing.

You have used hard water, which has 

caused scale flakes to develop in the 

water tank. Clean the iron according 

to Cleaning section.

Press and hold the steam button for about 

one minute to get steam. Then hold one 

more minute in order to clean the steam 

generating system. Before starting ironing, 

please test your iron on an old towel to 

ensure that no residues inside the iron are 

transferred to your garments. 

Water leaks from the soleplate 

while the iron is cooling down 

or after it has been stored.

The iron has been put in horizontal 

position while there is still water in 

the water tank.

Empty the water tank.

Brown streaks come out of the 

soleplate while ironing and 

stain the linen.

You may have used chemical 

descaling agents different from the 

recommendation.

To prevent this from happening, it is 

recommended to exchange the Soft Water 

Activator according to the indications.

Fabric fibers have accumulated in 

the holes of the soleplate and are 

burning.

Clean the soleplate with a damp soft cloth.

Fabrics might not be properly rinsed 

or the garments are new and have 

not been washed before ironing.

Please rinse the fabrics properly before 

ironing.

DISPOSAL

This symbol on the product indicates that this product contains a battery which shall not be disposed with 
normal household waste.

This symbol on the product or on its packaging indicates that the product may not be treated as household 
waste. To recycle your product, please take it to an official collection point or to an Electrolux service center 
that can remove and recycle the battery and electric parts in a safe and professional way. Follow your 
country’s rules for the separate collection of electrical products and rechargeable batteries. 

Electrolux reserves the right to change products, information and specifications without notice.