Ardesto IR-C8815 - Инструкция по эксплуатации - Страница 19

EN

20

using an old and unnecessary fabric.

Brushes for fabrics or fur

•  Use the brush so that the steam penetrates the fabric, effectively 

smoothing out creases

Note:

make sure the brush is cold when installing.

•  When installing the brush, turn the steamer handle plate 

upwards, press the brush and tighten the locking clip.

•  Move the brush from upwards to downwards.

•  Before removing the brush, turn off the power. Remove the 

brush when steam stops coming out of the steam brush. 

CAUTION

: to avoid burns, do not touch the stainless steel panel 

on the steamer handle.

Creasing attachment 

•  This accessory will help to create decorative folds on the hem of 

things.

•  Place the accessory on the handle of the steamer and press it 

firmly.

•  While holding the handle of the steamer, open the pressure 

panel of the accessory, see Fig. 17.

•  Place the fabric between the pressure panel of the accessory.

•  Clamp the fabric between the panels and start ironing from top 

to bottom, see Fig. 18 and fig. 19.

•  Before removing the accessory, please turn off the power. 

Remove the accessory when steam stops coming from the 

steam brush. 

CAUTION:

 to avoid burns, do not touch the panel 

on the steamer handle.

CLEANING AND STORAGE

•  After use, remove the water tank from the housing and 

pour out the water.

•  Turn on the appliance for 1 minute to dry the system 

from residual water. After that, turn off the power and