Ardesto IR-C8815 - Инструкция по эксплуатации - Страница 17

EN

18

INSTALLATION (BEFORE USE)

•  Please read the instruction carefully. 

•  Remove all the package. 

•  Do not connect the device to the outlet until you have completed the 

installation. 

•  Familiarize yourself with the assembly picture, see Fig. 1.

•  Install the telescopic pole in the corresponding hole on the device 

body, see Fig. 2.

•  After installing the pole turn it clockwise and make sure that the pole 

is firmly tightened, see Fig. 3.

•  Release the telescopic clamps, pull the aluminum rod up, see Fig. 4.

•  Fix the chosen height of the pole using fasteners, see Fig. 5.

•  Install the steam hose in the corresponding hole, see Fig. 6.
•  Fix the handle of the steamer on the telescopic stand, see Fig. 7.

STEAMING INSTRUCTIONS

•  Open the lid of the water tank and pour water, see Fig. 8 and Fig. 9.

•  Do not pour hot water.

•  Close the lid of the water tank, install the tank on the appliance body, 

see Fig. 10 and Fig. 11.

•  Pull out the power cable, connect it to the outlet, press the power 

switch, see Fig. 12 and Fig. 13.

•  After about one minute, the steam indicator will light up.

•  Remove the steam brush from the pole and start steaming, gently 

moving the brush up and down along the fabric, see Fig. 14.

•  The steam tube may make gurgling sounds during operation. This is a 

normal phenomenon. If such a sound occurs, hang the steam pipe on 

a pole so that the condensate drains downwards.

•  To prolong the service life of the appliance, after use pour the water 

from the tank, turn on the appliance for 1 minute to dry the system 

from residual water. After that, turn off the power and disconnect the 

device from the outlet.